mountz美国蒙士转矩传感器SDX50i (078001)

Torque Sensors for auditing or tightening fasteners to a specified torque when mated with a torque analyzer.
Ergonomic rubber grip and stainless steel Female/Hex bit holder.
Features “ARC II” technology, an instant auto-recognition system of the SDX connected to the FTA-100, LTT or PTT.
Connect to a torque analyzer to monitor, test or audit a fastener.
Safe Overload: 125% of Rated Output.
Length x Width ( 6” x 1 1/2”)
Weight 0.5 lbs
Accuracy ± .25% of full scale*.

Note: * This is the stand alone accuracy for the torque sensor. When the torque sensor is coupled with a Mountz torque analyzer, there is a system accuracy. Review the system accuracy listed with each torque analyzer (FTA-100, PTT or LTT).

Model	Item #	American	S.I.	Drive Size
SDX50i	078001	1 - 10 lbf.in	11.3 - 113 cN.m	1/4 F/Hex
SDX50i	078001	5 - 50 lbf.in	56.5 - 565 cN.m	1/4 F/Hex

Certified: Supplied with NIST-Traceable Certification of Calibration

SDX Pin Connection
A = Signal (+)
B = Signal (-)
C = Excitation (-)
D = Excitation (+)
E/F = N/A

mountz美国蒙士转矩传感器SDX50i (078001)