SMD测试仪自动识别片状电阻电容 MS8910-SMD

MS8910 SMD测试仪自动识别片状电阻电容外贸爆款

术指标：

功能	量程	分辨率	精度
电阻	300Ω/3KΩ/30K/300K/ 3MΩ 30MΩ	0.1Ω	±(1%rdg+ 2dgt) “ “ “ ±(1.2rd%+3dgt)
电容	3nF/30nF/ 300nF/ 3uF/30uF/ 300uF/3mF/ 30mF	1pF	±(2.5%rdg+ 3dgt) “ “ ±(3%rdg+ 3dgt)
二极管	开路电压: 2.8V 测试电流t : 2mA
通断	电阻值小于30Ω, 蜂鸣器就响。

附件: 备份测试针：2个

MS8910 SMD测试仪自动识别片状电阻电容外贸爆款

The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD （Surface Mounting

Device), there are Chip type resistor, Chip type capacitor and diode, for example. Moreover, the Tester have the continuity checking function

The Tester is automatically identified the passive Component as has been indicated above. Therefore, the measurement are allowed by fully automatic detection. The Tester is designed to meet IEC1010-1 standard and Stipulation of 2-Poulation Grade. The Tester conform to the European Union’s following Requirement: CE regulation 89/336 (EMC Electromagnetic Compatibility）。

The entire outer surface of the Tester case has been with thermo plastic elastomer, and the two testing pins has been gold-plated, so that it is reduce pin contact resistance and prevent to get rusty.

This operating instruction covers information on safety and caution, so please read relevant information carefully and observe all the warming and note strictly.

MS8910 SMD测试仪自动识别片状电阻电容外贸爆款

Features:

3000 counts LCD display
Full automatic measurement
Auto scanning the Resistance/Capacitance/Diode
Function selection by one “FUNC” Push Button
Data Hold function
Continuity Checking function
Over Load Indication ( ‘OL’)
Low Battery Indication
Power Supply: 3V Lithium Battery CR2032 (included)
Auto Power OFF. If the Tester is idle for more than 10 minutes, the tester will automatically turn off the power .
Operating temperature & Humidity: 0 ~ 40℃(32 ~104 ℉) & < 80% RH
Storage temperature & Humidity: -10 ~ 50℃ (14 ~ 122 ℉) & <70%RH
Safety Class: IEC61010-1, 50V CAT III
EMC： According to CE regulation 89/336.
Dimension (L x W x H) & Weight: 170 x 31 x 17mm, Approx. 48.6 g

MS8910 SMD测试仪自动识别片状电阻电容外贸爆款

Resistance
Range (Ω)	Resolution (Ω)	Accuracy
300	0.1	±(1.0% of rdg + 2 digits)
3K	1
30K	10
300K	100
3M	1K
30M	10K	±(1.2% of rdg + 3 digits)
Capacitance
Range (F)	Resolution (F)	Accuracy
3n	1p	±(2.5% of rdg + 3 digits)
30n	10p
300n	100p
3μ	1n
30μ	10n
300μ	100n	±(3.0% of rdg + 3 digits)
3m	1μ
30m	10μ
Continuity	The buzzer will sound if the resistance is less than 30 ohms
Diode Check	Testing current: 2mA	Open Circuit voltage: 2.8 V

MS8910 SMD测试仪自动识别片状电阻电容外贸爆款

MS8910 SMD测试仪自动识别片状电阻电容外贸爆款