美国MOUNTZ蒙士扭矩传感器BLRTSX140z-R (170260)

Non-contact signal transfer and maintenance free.
The brushless rotary torque & angle sensor is a compact design & bi-directional.
Used in-line with rotating shafts or nutrunners for feed back control. Motor testings, high RPM Tools or rotational measurement applications.
RA Models:
- Angle output 2-channel quadrature
- 360 pulses per rotation
- Ability to measure the rotation angle of a fastener
- Joint rate & breakaway torque can be measured too
Features ARCII technology, an instant auto-recognition system of the BLRTSX connected to the PTT or LTT.
Accuracy ± .2% of full scale*.

Note: Note: * This is the stand alone accuracy for the torque sensor. When the torque sensor is coupled with a Mountz torque analyzer, there is a system accuracy. Review the system accuracy listed with each torque analyzer (PTT or LTT).

Torque Ranges

Model	Item #	American	S.I.	Input Drive	Output Drive
BLRTSX140z-R	170260	25 - 140 ozf.in	18 - 98.8 cN.m	Shaft	Shaft
BLRTSX140z-RA	170261	25 - 140 ozf.in	18 - 98.8 cN.m	Shaft	Shaft
BLRTSX18i-R	170262	2 - 18 lbf.in	22.5 - 203 cN.m	Shaft	Shaft
BLRTSX18i-RA	170263	2 - 18 lbf.in	22.5 - 203 cN.m	Shaft	Shaft
BLRTSX44i-R	170264	4 - 44 lbf.in	45.2 - 497 cN.m	Shaft	Shaft
BLRTSX44i-RA	170265	4 - 44 lbf.in	45.2 - 497 cN.m	Shaft	Shaft
BLRTSX89i-R	170266	10 - 89 lbf.in	113 -1005 cN.m	Shaft	Shaft
BLRTSX89i-RA	170267	10 - 89 lbf.in	113 -1005 cN.m	Shaft	Shaft
BLRTSX177i-R	170268	18 - 177 lbf.in	203.4 - 2000 cN.m	*	*
BLRTSX177i-RA	170269	18 - 177 lbf.in	203.4 - 2000 cN.m	*	*
BLRTSX36F-R	170270	4 - 36 lbf.ft	5 - 50 N.m	*	*
BLRTSX36F-RA	170271	4 - 36 lbf.ft	5 - 50 N.m	*	*
BLRTSX73F-RA	170272	8 - 73 lbf.ft	10 - 100 N.m	*	*
BLRTSX148F-RA	170273	15 - 148 lbf.ft	20 - 200N.m	*	*
BLRTSX368F-RA	170274	37 - 368 lbf.ft	50 - 500 N.m	*	*
BLRTSX738F-RA	170275	74 - 738 lbf.ft	100 - 1000 N.m	*	*

R models are Torque only transducers.
RA models are Torque & Angle tranducers.
* With feather keyways (2x180 degree)

Certified: Supplied with NIST-Traceable Certification of Calibration

Dimensions

BLRTSX-R Pin Connection

A = Ground (Shunt Calibration)
C = Torque Output
D = Ground (Torque Output)
E = Ground (Supply)
F = Supply, 11-26 VDC, 1 W
K = Shunt Calibration
M = Shield
B,G,H,J & L = N/A

BLRTSX-RA Pin Connection

A = Ground (Shunt Calibration)
B = Angle 1 Speed
C = Torque Output
D = Ground (Torque Output)
E = Ground (Supply)
F = Supply, 11-26 VDC, 1 W
G = Angle 2 (90 running after Angle 1)
H = +5V (Angle Voltage)
K = Shunt Calibration
M = Shield
J & L = N/A

Note! For optimum performance, it is recommended to utilize coupling in order to minimize extraneous load & moments due to misalignment. Contact customer service for information.

美国MOUNTZ蒙士扭矩传感器BLRTSX140z-R (170260)