Instrument type Coating thickness measuring instrument for road pavement Specimens All pavements made of asphalt or rock materials that are typically used in road construction, even with ferromagnetic properties (due to a magnetite content) Order number 603-140 Overall dimensions Height 1180 mm (46.5“); width 810 mm (31.9“); length 1150 mm (45.3“) Total weight Ready to ship: about 25 kg (55 lbs) Measurement probe Type ET280: Order no. 603-302; eddy-current method DIN EN ISO 2360 Measurement range 1 – 30 cm (1.2 - 12“) Probe dimensions Height 205 mm (8“); diameter 300 mm (11.8“); cable length 1.5 m (5 ft) Corrective calibration With corrective calibration standard set: Order number 603-081 Correction standard 1: Height 5 cm (2“) Correction standard 2: Height 15 cm (6“) Aluminum base 1.5 mm (0.06“) thick Reflector Al self-adhesive foil 30 x 70 cm (12 - 28“) according to standard content of shipment. The instrument can be calibrated to 6 additional reflector sizes. Depending on the reflector size, the master calibration standard set (order number 603-080) will be required additionally. Trueness 0 to 10 cm (0“ to 4“):0.05 cm (0.01“) 10 to 30 cm (4“ to 12“) : to 0.5 % of the reading Ambient temperature + 5 °C to + 40 °C (41 ... 104 °F) Power supply 9 V block battery or 9 V NiCd battery or Plug-in type AC adapter (12 V 30 mA) 220 V or 110 V Additional performance • Digital measurement reading on large LC display with operator instructions features ISOSCOPE® MP30 • Acoustic signal for localizing the reflector; head receiver available • Analog bar display with freely selectable limit values for localizing the reflector • Same measurement sensitivity for reflector search and coating thickness measurement, thus, no toggling required • RS232 interface for data transfer • Measurement cart can be folded up for transportation in a car Memory capacity A maximum of 10,000 measurements can be stored in up to 100 applications Content of shipment Foldable measurement cart II; ISOSCOPE® MP30; operator’s manual; ET280 probe with heavy ISOSCOPE® MP30 ROAD canvas bag for transport and storage; probe strap, Adapter ET280, cable between probe and instrument, carrying case NA; 1 roll aluminum reflector foil; among others Accessories Calibration standard set for the calibration: Order no. 603-081 Master calibration standard set: Order no. 603-080 Data printer FMP3040: Order no.602-890 Carrying box MP: Order no. 602-891 Head receiver MP30/40-H: Order no. 602-521 Spare parts Adapter ET280: Order number 603-142 Probe cable T280: Order number 603-144 NiCd battery 9V: Order number 600-225 Plug-in type charger for the NiCd battery: Order number 600-226 Consumables Aluminum self-adhesive foil as reflector, width 30 cm (12“), length 50 m (164 ft), Order no. 600-322 Printer paper FMP3040/F2000 VE (10 rolls); Order no. 600-410商铺其他产品