Microfacia 闪光报警器

简单介绍
微型指示牌微型指示牌为运行或故障指示LED窗口。使用指示牌窗口，控制板的设计可变得更为美观，呈一排显示微型仪表对于采用AC或DC电压进行直接操作非常有用。特点 1、完全集成结构 2、适用于无电势或接触电势 3、普通+ve或普通-ve配置 4、超亮度LEDs（红色） 5、耗电低 6、230V AC或12V外部电源 7、24V DC 型 8、48/110/220V DC型内置附件供电 9、前部可替换型窗口及刻字 10、两种窗口尺寸-大和小 11、DIN标准面板保险开关 12、铸型周边设备

技术参数

输出	前部窗口指示牌LED
功率
指示牌窗口尺寸	大：66 x 30mm 小：30 x 30mm
闪烁率
LED	红色（根据要求可选择琥珀色/绿色）
询问电压
响应时间
耗电	1.5瓦/窗口
成组（跳闸/无跳闸）	可选
尺寸（mm）	外部（L x W x D）(w/o PSU 144 x 72 x 80) 小窗口尺寸30 x 30，大窗口尺寸62 x 30 设备尺寸：（含PSU）144 x 72 x215
重量（约）	700gms. (含PSU) 250gms. (W/o PSU)

Introduction:

Monitors the input potential free, contacts (NO or NC) for any change of status( Abnormal) and activates one common output relay for audible device with respective flashing LED windows. Thus indicating the “Alarm” status. This flashing annunciation window is “Acknowledged” and “Reset” (when returns back to normal) by external push buttons

Features:

· Suitable for 4 alarm points
· Powerful Common Microprocessor Circuit.
· Fully integral Architecture Construction.
· Built-in System Watchdog LED.
· Optically Isolated Input Circuit.
· NO / NC Selectable Input Configuration.
· Selectable Grouping Facility
· Use of Super Bright LED's.
· Low Power Consumption.
· 96 x 96 DIN standard panel mount enclosure

Application Areas:

Technical Specifications:

Sr.

Parameter

Specifications

Auxiliary Supply

12 / 24 / 110 / 220 V AC / DC (for potential free contacts)

Input

Potential Free Contacts or Potential Contact

Output

Window Facia LEDs on front

Rating

—

Facia Window Sizes

Big : 66 x 30 mm Small : 30 x 30 mm

Flash Rate

—

LED

Colour RED (Amber / Green on request)

Interrogation Voltage

–

Response Time

—

Power Consumption

1.5 Watts per Window

Grouping (Trip / Non Trip)

Optional

Dimensions (mm)

Overall (L x W x D ) (w/o PSU 144 x 72 x 80) Window Dimensions for Small 30 x 30, for Big 62 x 30 Unit Dimensions : (With PSU) 144 x 72 x 215

Weight (Approx.)

700 gms. (With PSU) 250 gms. (W/o PSU)