长期供应德国PTL温度测试角F06.09

专业代理德国PTL温度测试角F06.09

PTL Temperature Measuring Board

to measure the temperatures in the bases or in the fixing surfaces for appliances and luminaries in operation

according to

IEC 60335-1

:2006-09 § 11.2 and § 11.3.

Standard Outfit:

Plywood board, 20 mm thick, with frame on all sides and with covering board at the lower side, together approx. 150 mm thick, with 4 feet,

set Measuring Points consisting of:

Copper Disks, diameter 15 mm, 1 mm thick, embedded at distances of 50 mm x 50 mm in the plywood board,

and Fine-wire Thermocouples nickelchromium-nickel (NiCr-Ni), soldered to the back of the copper disks, thermoelectric wires with a diameter of 0.3 mm, insulated with glass-silk or similar temperature resistant material,

set of change-over switches to select the lines resp. rows of the copper disks, to connect the selected copper disk with socket-outlet or temperature indicating instrument,

socket-outlet, two-pole, almost free of thermoelectric voltage, plug with cable of nickelchromium-nickel, length 1.5 m, for the connection of a external measuring instrument,

temperature indicating instrument supplied by battery, and switch to select instrument or socket-outlet.

Design:

Plywood board, frame and copper disks varnished dull black, copper disk lines and rows marked.

Most Temperature Measuring Boards are tailor-made, the following Article Nos. are examples.

Measuring area
in mm x mm

Copper disks
lines x rows = quantity

Article No.:

351 x 650

7 x 13 = 91

T 06.09

500 x 750

10 x 15 = 150

T 06.15

700 x 900

14 x 18 = 252

T 06.25

850 x 1 150

17 x 23 = 391

T 06.39

长期供应德国PTL温度测试角F06.09