德国PTL 滚筒测试机器 F06.50

专业代理德国PTL F06.50滚筒测试机器

Standard Outfit:

barrel, consisting of a bearing-mounted middle segment, 2 intermediate segments of 250 mm height, and 2 bottom segments, internal length of the chute 275 mm, internal width of the chute 275 mm, bottoms made of 19 mm thick wood, with removable steel sheets of 3 mm thickness, including a charging door, internal height 1 175 mm, height of fall 1 000 mm, by removing the intermediate segments convertible to internal height 675 mm and height of fall 500 mm,

frame with barrel support,

drive unit with AC geared motor, to drive the barrel at 5 rpm, with slip friction clutch as protection in case of accidental contact,

switching and monitoring unit with fuses, protecting switch for the motor, preset able counter to indicate the number of falls and to switch off the unit.

Design:

steel construction, varnished papyrus-white structured, barrel corpus of stainless steel sheet, varnished stone-grey structured, some steel parts black-oxide-finished, for connection to 230 V AC, 50 Hz,

Tumbling Barrel Test Machine 50

Article No.:

F 06.50

Alternatively:

F 06.15, similar to F 06.50 however with one segment barrel of internal height 675 mm and height of fall 500 mm,

Tumbling Barrel Test Machine 15

Article No.:

F 06.15

Special model:

F 06.30, to determine the mechanical strength of accessories for vacuum cleaners, according to IEC 60312, similar to F 06.15 however of larger dimensions, total height of the barrel approx. 1 070 mm, height of fall 800 mm,

Tumbling Barrel Test Machine 30