出售日本NMB NS115P

出售日本NMB NS115P 称重传感器

NS115P / NS115 series


・		Excellent in the long term stability.
・		Accuracy 0.1%R.O. is available (including non-linearity, hysteresis and repeatability)
・		Small size and light weight, the Cable horizontal putting out type is possible.
・		Excellent in solidity and a surge pressure
・		Attached zero point adjustment
*		Application Automatic transmission testing equipment, Solenoid valve testing device, Fuel cell evaluation device

出售日本NMB NS115P 称重传感器的详细介绍：
Rated capacity	500 kPa ~ 10 MPa (NS115P / High-accuracy type) 5 MPa ~ 50 MPa (NS115 / Standard))
Safe overload	200 %R.C.
Ultimate overload	300 %R.C.
Accuracy	0.1 %R.O. (NS115P / High-accuracy type) 0.5 %R.O. (NS115 / Standard type)) (including non-linearity, hysteresis and repeatability)
Rated output	Current : 4 mA ~ 20 mA (2 wires method, Load resistance 500 Ω or less, at 24 V) Voltage : 0 V ~ 5 V, 0 V ~ 10 V (Load resistance 5 kΩ or more).
Zero adjustment range	±1 %
Power supply voltage	DC 24 V(18 V ~ 28 V)
Power consumption	Approx. 20 mA
Insulation resistance	1 000 MΩ or more (DC 50 V)
Temp. range, compensated	-20 ℃ ~ 70 ℃
Temp. range, safe	-30 ℃ ~ 80 ℃
Temp. effect on zero	±0.15 %R.O./10 ℃ (NS115P / High-accuracy type) 0.5 %R.O./10℃ (NS115 / Standard type)
Temp. effect on output	±0.15 %LOAD/10℃ (NS115P / High-accuracy type 0.5 %LOAD/10℃ (NS115 / Standard type)
Ｏ-ring seal	FKM4-class D (High-accuracy type), NBR(Standard type) Selectable by the medium.
Class of protection	IP67
Material of pressure hole	SUS316L (high-accuracy type), SUS304L (Standard type)
Material of cover	SUS316 (high-accuracy type), Aluminium (Standard type)
Material of pressure diaphragm	Single crystal sapphire
Mounting screw	1/8 ･ 1/4 ･ 3/8G{PF}, {PT}
Weight	NS115 : Approx. 200 g, NS115P : 250 g (Main body only)
Tightening torque	20 N･m ~ 40 N･m

出售日本NMB NS115P 称重传感器的选型：

出售日本NMB NS115P 称重传感器