Digital indicator model TMD-100 for tension meter system
・
Tension meter
・
Space-saving and miniaturized design.
・
Normally equipped with the input, add/sub function two load cell.
・
Four systems in one can be displayed.
・
Equipped with four channels analog output as a standard.
(It is possible to increase it as an option.)
・
Use as a tension meters, steel line, paper, and films.
新款美培亚控制器,显示仪表TMD-100
Bridge power supply
DC10 V±0.3 V within 30 mA (Changeable to DC2.5 V)
with remote sensing function
Input range
F.S. setting is available at the input range from -0.2 mV/V to 3.1 mV/V
(When bridge power supply is DC5 V)
Zero adjustment range
-1.9 mV/V ~ 1.9 mV/V
Non-linearity
0.01 %F.S.
Temperature coefficient
Zero point ±0.2 μV/℃
Sensitivity ±0.001 5 %F.S./℃
(input conversion, F.S. setting at the input from 0.3 mV/V to 3.1 mV/V)
A/D sampling
100 times/s (Changeable to 4 times/s or 20 times/s)
Load display
four systems of WS, DS, ADD and DIFF
Display range
-19 999 ~ 99 999
Condition display
HEALTHY, CHECK, DS DOWN, WS DOWN
Decimal point display
Changeable to No display, 101, 102, 103 or 104
External control function
ZERO, LOCK, DS DOWN, WS DOWN,
DS & WS DOWN
Analog output(4ch)
DC0 V ~ 10 V, DC0 V ~ 5 V, DC0 V ~ 1 V, DC±10 V, DC±5 V, DC±1 V load resistance 5 kΩor more, or DC4 mA ~ 20 mA load resistane 510 Ωor less (changeable by the DIP switch)
Operating temp./humidity range
Temperature -10 ℃ ~ 50 ℃, Humidity 85 %RH or less
(Non condensing)
Power supply voltage
AC100 V ~ 240 V (AC85 V ~ AC264 V) 50/60 Hz
Power consumption
Approx. 25 VA
Outline dimensions(WxHxD)
200 mm x 150 mm x 200 mm (excludes protruding parts)