日本NMB控制器显示仪表 DML-802B

新出日本NMB DML-802B控制器，显示仪表

Digital Moment limitter DML - 802B

・ The hanging load and the operating radius are displayed and the alarm is output.
・ Japan Crane Association accepted product

*新出日本NMB DML-802B控制器，显示仪表


Power supply voltage to sensor	Load Cell DC12 V±1.2 V / within 40 mA/unit Angle detector DC12 V±1.2 V / within 20 mA
Input range	Load cell F.S. setting can be made at the input from 0.5 mV/V to 3 mV/V Angle detector 1.4 V ~ 5.6 V (-15° ~ 105°)
Display of moment ratio	Display range from 60 % to 125 % (Bar graph LED) Minimum resolution 2.5 %
Present load display	Display range from -99 t to 999 t or from -9.9 t to 199.9 t
Present working radius	Display range from 0.0 m to 99.9 m
Condition display	Applied load cell is specified. (Load cell No.1 ~ 3)
Monitor display	One of the selection has been displayed either of Limit load, Limit radius, Jib angle, Moment No., Jib No. or Range No.
Limited output monitor display	Display output condition of limited output No.1 to No.6
Display of 90 % and 100 %	Display signal output condition of 90 % and 100 % of the lifting load
Display of up and down	Display input signal condtion for correction executing instruction of lift-up and lift-down
Display times	Changeable to 1 times/s, 2 times/s or 0.5 times/s
Buzer for emergency	Parts No. EB2112 DC12 V, 35 mA
Power supply voltage	DC24 V (DC18 V ~ 36 V), Power consumption Approx. 3 A
Outline dimensions	100 mm(W) x 210 mm(H) x 162.9 mm(D) (Excluding protruding parts)
Weight	Approx. 2.5 kg
Angle detector Specifications
Rated voltage	DC10.5 V ~ 30 V
Detecting angle	-15° ~ 105°
Output voltage	Sensitivity 35 mV±1.2 mV (per 1° )
Linearity	±1 %F.S.
Current output	4 mA or less
Power consumption	10 mA or less
Weight	Approx. 2 kg (including cable)
Cable	Approx. 15 m (Cable end is cut)

新出日本NMB DML-802B控制器，显示仪表