PCB type Transmitter CSA-593 for tie bar measurement system
・Special transmitter for tie-bar gage.
・Suitable for the control of the injection molding machine clamping operation.
・The noise proof has improved.
・Fast responsiveness and compact size.
・The working efficiency improves by the connector detaching type.
・The low price was achieved.
推出日本NMB CSA-593变送器的详细介绍:
Bridge power supply
DC5 V±0.3 V within 30 mA
Applicable transducer
One pair of tie bar gage (350 Ω)
Input range
±500 μst
Output voltage
±10 V
Output load resistance
2 kΩ or more
Sensitivity
10 V output at the input of 500 μst
Non-linearity
0.02 %F.S. (Transmitter itself)
Temperature coefficient
Zero ±10 μV/℃ (Input conversion)
Sensitivity ±0.05 %F.S./℃
Frequency response range
Approx. 100 Hz (Fixed)
A/D sampling
2 000 times/s
A/D internal resolution
24 bit
Output frequency
2 000 times/s (Synchronous with A/D sampling rate)
Outptu resolution
Approx. 1/10 000
Specifications of auto zero
Range Approx. ±3 000 μst
Required time Approx. 50 ms
Accuracy within ±5 V
External input 1 point
* The result of auto zero is not retained in blacking out.
Check function
Output Approx. 5 V
External input 1 point
* This function is the usage for maintenance.
Operating temp./humidity range
-10 ℃ ~ 70 ℃,
80 %RH or less ((Non condensing)
Power supply voltage
DC24 V (Permissible variable range DC20 V ~ DC26 V)
Power consumption
within approx. 50 mA (at DC24 V)
Outline dimensions(WxHxD)
86.4 mm (W) x 61 mm (H) x 24.5 mm (D)
(Excludes connector and protruding parts.)