日本安立HD-1100K

日本安立HD-1100K系列温度主机，追求高精度，可靠性，操作简单的HD-1000系列可以和安立计器的多种多样的温度传感器配合使用于不同领域。
日本安立HD-1100K系列主机，可以配套N型温度测棒，S型号温度测棒，Functions
Waterproof specifications : Equivalent to IPX5
Protected against water jets - Water projected at all angles
through a 6.3mm nozzle at a flow rate of 12.5 liters / min at a
pressure of 30kN /m2 for 3 minutes from a distance of 3 meters.
5分钟以上不使用按钮，主机将自动关闭。按　　键切换分辨率
按　　键，可固定测量数据并保持该数据的显示。可固定测量温度的最大值或最小值
可设定测量标准值。表示温度超出设定范围外时，可显示・蜂鸣・信号输出进
行警告。
电压输出时1℃为1mV 或1℃为0.1mV。按键切换℃与°F。
The thermometer will turn the power off
automatically after 5 minutes.
Press the 　　key to change the resolution of
readings.
The thermometer stops measurement by the 　　　
　　key and holds the present readings.
The peak（Max.）value and the valley（Min.）value
can be displayed by the　　 key on the sub-display.
The displayed value can be adjusted by the 　
　 key.
The thermometer gives an alarm when readings
go beyond the high or low limits.
1mV/℃ Output 1mV per ℃ in conjunction with readings.
10mV/℃ Output 10mV per ℃ in conjunction with readings.
Press the 　 key to change the temperature unit of the
displayed temperature.
IPX5防水功能。可防御来自任何方向的喷水（12.5L/分）。
Stores readings at user - selected time intervals.
User specified time interval and the remaining
amount of memory are displayed on the　
sub -display.
设定记录间隔和剩余可记录数同时显示。
便于确认的大型显示屏
按　　键打开背光灯，可在黑暗处确认数据
Large easy - to - read LCD display The backlight will operate by the 　　 key and the LCD display will
be visible even in a dark place.
HOLD P/V
HOLD
1/0.1
°C / °F
ALM
SET
AUTO
OFF
CAL
SET
Waterproof specifications Memory function
Display Backlight
Resolution change
Hold P / V Hold
Calibration Alarm output
Analog output °C / °F Change
防水功能记录功能
显示背光灯