Function功能：

w          Measure the height of steps, width of grooves, position of bores or shafts in 2 co-ordinates.可测量台阶高度，槽宽，在二维方向确定孔或轴的位置。

w          Measure diameter, distance of two grooves, center to center distance of two bores, angel, deviation of perpendicularity and straightness, deviation in flatness and parallelism.可测量孔径、孔距、角度、直线度、平面度、垂直度、平行度。

w          Excellent repeatability thanks to its dynamic probing system with constant measuring force.由动态探测系统和恒定的测量力决定了极好的重复性。

w          The probe is based on an incremental glass scale insuring the best dimensional accuracy over the whole measuring span.探头以增量光栅为基础，确保在整个测量范围中最好的空间精度。

w          Instant output on power panel display of measured values. With the TESA MICRO-HITE plus M the operator no longer needs to make manual calculations.直接在控制台上输出测量值。有了测高仪，操作者不再需要手动计算。

w          Can motorized for rising and falling.可自动升降。

w          You can easily move the TESA MICRO-HITE plus M across a surface plate thanks to its air cushion from a built-in battery powered pump.你能通过已装的气泵轻松地在平台上移动它。

w          Data transfer of measured value to the RS232 port.测量值的数据传输到RS232端口。

Measuring in 1 and 2 co-ordinates. 在一维和二维方向测量