筛选
-
- 地区
- 全部
-
- 会员级别
- 全部
規格表 |
AC WITHSTAND VOLTAGE | |||
Range | Resolution | Accuracy | |
Output Voltage, Vac | 0 - 5000 @ 40mA max | 1 | ±( 2% of setting + 5V) |
Output Frequency | 50 or 60 Hz, ± 100 ppm | ||
Output Waveform | Sine wave, crest factor > 1.3 and < 1.5 | ||
Output Regulation | ± 1% of setting + 5V, from no load to full load | ||
SETTINGS | |||
Hi Limit, current, mA | 0.00 - 40.00 | 0.01 | ±( 2% of setting + 2 counts) |
Lo Limit, current, mA | 0.000 - 9.999 | 0.001 | ±( 2% of setting + 2 counts) |
Dwell Time, second | 0.3 - 999.9 | 0.1 | ±( 0.1% + 0.05 sec.) |
Ramp Time, second | 0.1 - 999.9 | 0.1 | ±( 0.1% + 0.05 sec.) |
Offset, current, mA | 0 - 2.000 or Auto | ||
Arc Detection | 9 ranges | ||
DC WITHSTAND VOLTAGE | |||
Output Voltage, DCV | 0 - 6000 | 1 | ±( 2% of setting + 5V) |
SETTINGS | |||
Hi-Limit, current, μA | 0 - 9999 | 1 | ±( 2% of setting + 2 counts) |
Lo-Limit, current, μA | 0 - 999.9 | 0.1 | ±( 2% of setting + 2 counts) |
Dwell Time, second | 0.4 - 999.9 | 0.1 | ±( 0.1% + 0.05 sec.) |
Ramp Time, second | 0.1 - 999.9 | 0.1 | ±( 0.1% + 0.05 sec.) |
Offset, current, μA | 0 - 200.0 or Auto | ||
Ramp-High, current, mA | On/Off user selection(12mA peak max.) | ||
Charge-Low, current, μA | 0 - 350 or Auto | ||
INSULATION RESISTANCE | |||
Range | Resolution | Accuracy | |
Output Voltage, DCV | 100 - 1000 | 1 | ±( 2% of setting+2V) |
SETTINGS | |||
Hi Limit, resistance, M Ω | 1 - 9999, 0=off | 1 | ±( 2% of setting + 2counts) @500-1000VDC/1-1000 M Ω |
Lo Limit, resistance, M Ω | 1 - 9999 | 1 | ±( 8% of setting + 2counts) @100-1000VDC/1-9999 M Ω |
Delay Time, second | 0.5 - 999.9 | 0.1 | ±( 0.1% + 0.05 sec.) |
Charge-Low, current, M Ω | 0 - 3.500, or Auto | ||
MEASUREMENT | |||
Voltage,KV | 0.00 - 6.00 | 0.01 | ±( 2% of reading + 1 count) |
AC Current, mA | 0.000 - 3.500 3.00 - 40.00 |
0.001 0.01 |
±( 2% of reading + 3 counts) |
DC Current, μA | 0 - 350.0 300 - 3500 3000 - 9990 |
0.1 1 10 |
±( 2% of reading + 3 counts) |
DC Voltage, V(Insulation) | 0 - 1000 | 1 | ±( 2% of reading + 3 counts) |
Resistance, M Ω | 1 - 9999 Autorange | - | ±( 2% of setting + 2counts) @500-1000VDC/1-1000M |
±( 8% of setting + 2counts) @100-1000VDC/1-9999M | |||
GENERAL | |||
Memory | 50 sets, 8 steps per memory | ||
PLC Remote Control | Test, Reset, Recall memory 1, 2, 3 functions | ||
PLC Signal Output | Pass, Fail, Processing | ||
External Scanner Port | Two, for connecting to 7002 scanners | ||
Internal Scanner | Optional, 8 channels, factory installed | ||
LCD Display | 20 x 2 LCD with back light, 9 ranges contrast setting | ||
Key Lock | Front panel or 4-digit password | ||
Pass/Fail Indicator | Lighted button and settable audible alarm | ||
Calibration | Build-in software and external calibrated meters | ||
Interface | RS232 standard, GPIB and Printer port optional | ||
Dimension / Net Weight | EIA 3U /430(W) x 133(H) x 500(D) mm / 22 Kg. | ||
Input Voltage, AC | 115/230 V ± 15%, 47 - 63 Hz | ||
Environment | 0 - 40 ℃ , RH 0 - 85% |
選購資訊 | |
7430 Dielectric Analyzer 7001 System Scanner 16W+16G, must specify opt. 710 7002 Scanner 4W+4G, must specify opt. 710 | |
附件表 | |
1101 High Voltage Test Cable 1102 Return Test Cable 1105 High Voltage Link Cable 1108 Return Link Cable 1109 High Voltage Output/Link Cable 1110 Remote Test/Reset Control 1111 External Scanner Cable 1112 Hipot/IR Test Cable Assembly 1115 Printer Port Card |
1116 RS232 Interface Card 1117 GPIB Interface Card 1118 GPIB Cable, 1m 1119 GPIB Cable, 2m 1123 High Voltage Link Cable 1125 Signal Link Cable 1127 High Voltage Test Probe 1130 RS232 Cable 1132 High Voltage Probe |
選購配備 | |
Opt. 705 Factory Installed RS232 Card Opt. 706 Factory Installed GPIB Card Opt. 707 Factory Installed Printer Port Opt.709 Increase 7002 Scanner to 8W Opt. 710 Cable Connection Kit Opt. 100 AC Input 100V |