7440 安规综合分析仪产地：台湾

規格表

AC WITHSTAND VOLTAGE
	Range	Resolution	Accuracy
Output Voltage, Vac	0 - 5000 @ 40mA max	1	±( 2% of setting + 5V)
Output Frequency	50 or 60 Hz, ?00 ppm
Output Waveform	Sine wave, crest factor > 1.3 and < 1.5
Output Regulation	±1 % of setting + 5V, from no load to full load
SETTINGS
Hi Limit, current, mA	0.00 - 40.00	0.01	±( 2% of setting + 2 counts)
Lo Limit, current, mA	0.000 - 9.999	0.001	±( 2% of setting + 2 counts)
Dwell Time, second	0.3 - 999.9	0.1	±( 0.1% + 0.05 sec.)
Ramp Time, second	0.1 - 999.9	0.1	±( 0.1% + 0.05 sec.)
Offset, current, mA	0 - 2.000 or Auto
Acr Detecion	9 ranges
DC WITHSTAND VOLTAGE
Output Voltage, DCV	0 - 6000	1	±( 2% of setting + 5V)
SETTINGS
Hi-Limit, current, μA	0 - 9999	1	±( 2% of setting + 2 counts)
Lo-Limit, current, μA	0 - 999.9	0.1	±( 2% of setting + 2 counts)
Dwell Time, second	0.4 - 999.9	0.1	±( 0.1% + 0.05 sec.)
Ramp Time, second	0.1 - 999.9	0.1	±( 0.1% + 0.05 sec.)
Offset, current, μA	0 - 200.0or Auto
Ramp-High, current, mA	On/Off user selection (12mA peak max.)
Charge-Low, current, μA	0 - 350 or Auto
INSULATION RESISTANCE
	Range	Resolution	Accuracy
Output Voltage, Vdc	100 - 1000	1	±( 2% of seffing+2V)
SETTINGS
Hi Limit, resistance, M Ω	1 - 9999, 0=off	1	±( 2% of setting + 2counts) @500-1000VDC/1-1000 M Ω
Lo Limit, resistance, M Ω	1 - 9999	1	±( 8% of setting + 2counts) @100-1000VDC/1-9999 M Ω
Delay Time, second	0.5 - 999.9	0.1	±( 0.1% + 0.05 sec.)
Charge-Low, current, μA	0 - 3.500, or Auto
GROUND BOND
Output Current, AC	3.00 - 30.00	0.01	± (2% of reading + 2 counts)
Output Voltage, AC	3.00 - 8.00	0.01	±( 2% of reading + 3 counts)
Output Frequency, Hz	50 or 60, ± 100 ppm
SETTINGS
Lead Resistance Offset, m Ω	200	1	±( 1% of setting + 2 m
Hi Limit, resistance, m Ω	0 - 600	1	±( 2% of setting + 2 m
Dwell Time, second	0.5 - 999.9	0.1	±( 0.1% + 0.05 sec.)
MEASUREMENT
Voltage, KV	0.00 - 6.00	0.01	±( 2% of reading + 1 count)
AC Current, mA	0.000 - 3.500 3.00 - 40.00	0.001 0.01	±( 2% of reading + 3 counts)
DC Current, μA	0 - 350.0 300 - 3500 3000 - 9990	0.1 1 10	±( 2% of reading + 3 counts)
DC Voltage, V(Insulation)	0 - 1000	1	? ±( 2% of reading + 2 counts)
Resistance, M Ω	1 - 9999 Autorange	-	±( 2% of setting + 2counts) @500-1000VDC/1-1000 M Ω
Resistance, M Ω	1 - 9999 Autorange	-	±( 8% of setting + 2counts) @100-1000VDC/1-9999 M Ω
GENERAL
Memory	50 sets, 8 steps per memory
PLC Remote Control	Test, Reset, Recall memory 1, 2, 3 functions
PLC Signal Output	Pass, Fail, Processing
External Scanner Port	Two, for connecting to 7002 scanners
Internal Scanner	Optional, 8 channels, factory installed
LCD Display	20 x 2 LCD with back light, 9 ranges contrast setting
Key Lock	Front panel or 4-digit password
Pass/Fail Indicator	Lighted button and settable audible alarm
Calibration	Build-in software and external calibrated meters
Interface	RS232 standard, GPIB and Printer port optional
Dimension / Net Weight	EIA 3U /430(W) x 133(H) x 500(D) mm / 22 Kg.
Input Voltage, AC	115/230 V ± 15%, 47 - 63 Hz
Environment	0 - 40 ℃ , RH 0 - 85%

選購資訊
7440 Safety Compliance Analyzer 7001 System Scanner 16W+16G, must specify opt. 710 7002 Scanner 4W+4G, must specify opt. 710

附件表
1101 High Voltage Test Cable 1103 High Current Test Cable 1104 High Current Return Test Cable 1105 High Voltage Link Cable 1109 High Voltage Output/Link Cable 1110 Remote Test/Reset Control 1111 External Scanner Cable	1115 Printer Port Card 1116 RS232 Interface Card 1117 GPIB Interface Card 1118 GPIB Cable, 1m 1119 GPIB Cable, 2m 1125 Signal Link Cable 1130 RS232 Cable

選購配備

Opt. 705 Factory Installed RS232 Card
Opt. 706 Factory Installed GPIB Card
Opt. 707 Factory Installed Printer Port
Opt. 709 Increase 7002 Scanner to 8W
Opt. 710 Cable Connection Kit
Opt. 100 AC Input 100V