ZVRE and ZVCE : the economy models

The test set of these models comprises two SWR bridges (ZVRE) or directional couplers (ZVCE), an RF switch, two measurement channels and one reference channel. They measure the magnitude and phase of all four S-parameters of a DUT, allow a full two-port calibration (TOSM) and have an exceptionally high accuracy and wide dynamic range.

ZVRE, ZVCE (bidirectional, 3 channels)

ZVR and ZVC : the universal models

ZVR and ZVC comprise a test set with two SWR bridges (ZVR) or directional couplers (ZVC), an RF switch, two measurement channels and - unlike ZVRE and ZVCE - two reference channels. With this configuration a variety of novel calibration procedures, eg TNA, can be performed, which considerably improve the accuracy particularly in non-coaxial applications. ZVR and ZVC are the allrounders of the family and suitable for applications in R&D and production no matter how sophisticated.

ZVR, ZVC (bidirectional, 4 channels)

Test sets

The network analyzers can be provided with different test set options so that an optimally configured test setup is available to suit the applications.

For the 4 GHz analyzers "active" or "passive" test sets with a characteristic impedance of 50 W or 75 W are available. A 50 W passive test set is standard equipment. With active test sets, the DUT can be biased directly via the inner conductor of the test port. The 8 GHz models ZVCE and ZVC are always equipped with 50 W active test sets. Depending on the model, the test sets comprise one or two power splitters, an electronic switch and one or two SWR bridges or directional couplers. Additional step attenuators (0 dB to 70 dB, components marked red in the drawings below) can be inserted into the generator paths and the two measurement channels to extend the power range of the receivers to +27 dBm and to lower minimum output power to -95 dBm. When the test sets are fitted with attenuators and the External Measurements option (components marked green in the drawings below), generator and receiver can be alternatively switched to three ports on the front panel (OUTPUT a1, INPUT b1, INPUT b2). This increases output power, sensitivity and dynamic range, and measurements down to 10 Hz can be performed with the 4 GHz models. In addition, the flexibility on external test sets, e.g. using an external pre-amplifier, is enhanced. The Reference Channel Ports (components marked blue in the drawings below) allow to feed the signal for the reference channel a1 from outside. This feature facilitates e.g. phase measurements on frequency converting devices. The test ports are fitted with female N connectors.

Test Set ZVRE and ZVCE

本公司专业经营各类二手进口仪器（销售、租赁业务），成色新，价格低，技术先进、质量可靠、性能稳定的优良产品。长期承接销售、租赁、维修、出售二手高档仪器,包括Agilent、HP、Anritsu、Advantest、R/S、/MARCONI等世界知名品牌的网络分析仪、频谱分析仪、综合测试仪、数字通讯测试仪、高频信号源、数字示波器、天馈线测试仪、电声测试仪，音频分析仪、等二手高频通讯测试仪器仪表的销售及租赁业务。

 

国仪电

本公司长期现金销售/收购/出售：网络分析仪、无线综合测试仪、频谱分析仪、视频音频分析仪、蓝牙测试仪、视频图象信号源、LCR测试仪、高低频信号源、示波器、万用表、手机程控电源、直流电源、电子负载、频率计、GPIB卡,PCI-GPIB卡、GPIB-USB-B等二手仪器出售/维修/收购。欢迎来电咨询!!。