日本CITIZEN西铁城变位感应器 EM-SA1RP/AN 电子检测器日本CITIZEN西铁城变位感应器 EM-SA1RP/AN 电子检测器日本CITIZEN西铁城变位感应器 EM-SA1RP/AN 电子检测器日本CITIZEN西铁城变位感应器 EM-SA1RP/AN 电子检测器日本CITIZEN西铁城变位感应器 EM-SA1RP/AN 电子检测器

• Ultra-Compact Form for Much Easier Installation
  While maintaining high sensitivity and high accuracy with a resolution of 0.1μm, the Elemetron EM-SA1R has achieved an ultra-compact form with a volume of just one fifties that of existing models.
• Innovative compact form enables various kinds of gang installation
  Because the display unit is detachable, it can be removed from the body of the amplifier and mounted on a panel.
  This helps you to save space in the system by arranging the elements close together.
  * For panel mounting, the optional display mounting unit (EM-SA1-DPM) is required.
• Separate conversion cable (3SEA-2834) is required to connect to the detectors.
• 

• Specifications

  
  

  Model	EM-SA1RP/RS (base unit)	EM-SA1RP/AN (base unit)	EM-SA1RC (sub unit)
  LCD Display	LCD with 6 digits and polarity, mode display, and two-color backlight
  Resolution	0.1/1/10μm (selectable by setting)
  Display range	-99.9999?+99.9999mm
  Indication error	±1%±1digit
  Response speed	Reset / peak clear / hold : Max 20 ms RS-232C communication : Approx. 2 × n units + 3 ms
  Fault detection	-NG/OK/+NG/6-rank judgement
  RS-232C *1	Equipped	Not equipped	Not equipped
  Analog output *1	Not equipped	Equipped	Equipped
  Number of detector inputs	1ch
  Zero set functino	Resetting is possible at any position using a switch on the front face, an external signal or the RS command.
  Data hold method	Hold of display and data by external signal
  Measuring direction	+/-(Can be set switched depending on the setting)
  Preset function	6 digits and polarity
  Peak measurement	+P,-P,P-P,(P-P)/2(+P:Maximum, -P:Minimum)
  Error functionality	Equipped
  Measurement condition registered	Seven items (Key, RS command)
  Accuracy guaranteed temperature range	24℃±5℃
  Operating ambient temperature	0?+40℃(to be no dew condensation or freezing) In storage: -10?+60℃
  Power supply	DC12V±10% or DC24V±10%
  Power consumption	100mA or less
  Weight	Approx. 110g		Approx. 60g
  Dimensions	63(W)×24(H)×48(D)mm
  Standards complied with	EMC Directive (EN61326-1:2006)

  *1 The optional dedicated cable is required.  Note that analog output supports absolute value display.