日本CITIZEN西铁城变位感应器 DTH-P20

日本CITIZEN西铁城变位感应器 DTH-P20 柱塞式感应检测器日本CITIZEN西铁城变位感应器 DTH-P20 柱塞式感应检测器日本CITIZEN西铁城变位感应器 DTH-P20 柱塞式感应检测器日本CITIZEN西铁城变位感应器 DTH-P20 柱塞式感应检测器日本CITIZEN西铁城变位感应器 DTH-P20 柱塞式感应检测器

A variety of detectors in response to all measuring conditions.
Very suitable for measurement requiring reading in 0.1 μm, measurement requiring a low measuring force, etc.
Standard plunger type.
Air lift type useful for automation available. (DTH-P16AL)

日本CITIZEN西铁城变位感应器 DTH-P20 柱塞式感应检测器

DTH-P16AL / DTH-P16ALA CAD Drawing

Specifications

Model		DTH-P20	DTH-P40	DTH-P70	DTH-P16AL
Measuring force		0.196N	0.392N	0.686N	0.157N
Measuring range		±1mm (-0.4 ? +1mm in the case of type A)
Stroke		4mm (3.5mm in the case of type A)
Zero point position		Approx. 2mm (0.5mm in the case of type A)
Repeatability		0.3μm
Accuracy guaranteed temperature range		24°C±5°C
Operating temperature		0?50°C
Weight (main body only)		Approx. 25g
Standard attachments	Cable length	3m
	Contact point *1	F-001
	Rubber bellows	M-131

_All the measuring forces are those in a state where no rubber bellows is attached.
(Each measuring force is about 0.05 to 0.15N higher if a rubber bellows is attached.)
_Non-standard specifications (model, measuring force, etc.) are available upon request.
*1Various other contact points are available.