canneed “CLT-600空罐试漏仪Leak Tester for can” 用于各类3片罐是否漏气，单次可完成6个罐的测量。    

检测方法：通过将罐浸入水浴，给罐施加一定测试内压，观察罐外壁是否产生气泡，若有气泡持续产生则说明罐发生漏气。使用专用夹具，确保可以测量不同直径和高度的罐。

技术参数:

最大测试压力： 0.4 Mpa

最大样罐直径：130mm

最大样罐高度： 300mm（可订做加高）

水槽尺寸：1500 x 600 x 500 mm (W x D x H)

尺寸：1500 x 800 x 800 mm(W x D x H)

重量：200kg

The  canneed “CLT-600 LeakTester for can ” is used for checking the permeability of 3-piececans in a water bath. The can is fixed to magnet disc plate andsubmerged into the water. At the same time it is subjected topressure and leaks are revealed by air bubbles. End and side seamsvisible.

A special parallel clamping systemenables to measure different diameters and heights with one device.The clamping pressure and the test pressure may be setindependantly.

The operator determines the periodof time the cans are under water. If he switches the by-pass leverand presses the two button valves, the cans deaerate and are liftedout of the water.The whole test cycle is automated and ispneumatically controlled by pressure regulator valves.

Maximum test pressure: 4 bar

Max. diameter: 130 mm

Max. can height: 300 mm

Bath dimensions: 1500 x 600 x 500 mm (W x D x H)

Dimensions: 1500 x 800 x 800 mm(W x D x H)

Weight: 200 kg