筛选
-
- 地区
- 全部
-
- 会员级别
- 全部
基本参数 | DI-9M-8 | DI-9M-08 | |
测量范围 | 0.020-8 N・m | 2.0-800 mN・m | |
0.20~80 kgf・cm | 0.020~8 kgf・cm | ||
0.20~70 lbf・in | 0.020~7 lbf・in | ||
精度 | ±0.5% (499 digit or less ±3digit) | ||
显示 | The 4 figures digital display of LCD | ||
测量方向 | CW-CCW (right and left) | ||
一键归0功能 | Return to zero by pressing clear button. | ||
测量模式 | Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output) | ||
上下限设置 | High and low value are measurement within the limits, and can be set up. | ||
实时数据输出 | Load torque value is outputted every about1/ 180 second. | ||
The Maximum, the minimum, and the average value display | The maximum, the minimum, average value, and the data number of 30 data are displayed.It saves to ten channels. | ||
Data Output | ASCII format (baud rate 19200) | ||
省电模式功能 | 10 minutes no use, automatically switch off. | ||
Power supply | Ni-Cd chargeable battery 1.2V × 5cells 700mAh | ||
充电3小时 | About 3hours | ||
连续工作3小时 | About 12hours | ||
clearance | It is a display clearance in set-up time. (0.1 - 3.0 sec) | ||
Socket size | □ 20mm/ □9.5mm | ||
Dimension / Weight | W:160×D:125×H:55 / About 1kg | ||
Recommend buffer accessories 扭力测试仪附件 | Measuring joint OW-20/OW-60 | Measuring joint OW-025/OW-10 | |
Cube (with a 5th page screw hole) 20x20x20 (M2.6/M3/M4/M5/M6 Tap processing) | |||
AC/DC adaptor | |||
Exclusive receipt case | |||
An inspection report, a proofreading certificate, a traceability system figure |
Specification | Type | ||||
OW-025 | OW-10 | OW-20 | OW-60 | ||
Measuring range N・m | 0.25 | 1 | 2 | 6 | |
Mechanical life (times) | 10,000 | 8,000 | 5,000 | 5,000 | |
Outer diameter size (mm) | Bit engagement part (screw part) | M2.6 cross recess screw | M3 cross recess screw | M4 cross recess screw | M6 cross recess screw |
The standard screw is cross recess screw but they may be altered as necessary | |||||
Outside diameter | φ28 | φ32 | φ32 | φ38 | |
Height | 44 | 51 | 51 | 69 | |
Installation | 20square ×4(t) |