830通风管道阻火器
Protectoseal系列编号830，压力/真空排气保护与阻火器，是为了防止昂贵的蒸发损失，油箱破裂，由于过度的压力，由于真空崩溃。阻火器可以防止火灾和火源的外部油箱爆炸引起的。在托盘发泄住房尽量减少坦克“呼吸”空气和蒸汽的损失。他们打开和关闭刚够维持安全的工作压力，避免损坏水箱。阻火器的安装外，只接触到蒸气中的宣泄
D组适用于蒸汽，如汽油和甲烷，作为全国电气规程（NEC 500条），一般相当于国际电工委员会（IEC）集团国际投资协定引用。

产品规格表 - PDF格式。（西班牙语|中文）.
安装及维修指南 - PDF格式。（西班牙语|中文）.
尺寸2“（DN50的）到10”（DN的250）。
FM认证2“，3”＆4“的尺寸6。.
UL认证”，8“＆10”。通过负重.
设置实现。
ProFlow ®尺寸/选型软件。
专利，配屋电影“气垫座位”.
低泄漏托盘设计 - 。认证测试报告。
节省时间的“摇摆螺栓设计”许可证方便。

PRESSURE / VACUUM CONSERVATION VENT WITH FLAME ARRESTER

Series No. 830

Protectoseal Series No. 830, Pressure / Vacuum Conservation Vent with Flame Arrester, is designed to prevent costly evaporation losses, tank rupture due to over-pressure, and collapse due to vacuum. The flame arrester protects tank against fire and explosion caused by exterior sources of ignition. Pallets in the vent housing minimize air and vapor loss as the tank "breathes". They open and close just enough to maintain safe working pressures and avoid damage to the tank. The flame arrester is mounted externally and is only exposed to vapors when venting.

Suitable for Group D Vapors, such as gasoline and methane, as referenced in the National Electric Code (NEC Article 500), generally equivalent to International Electrotechnical Commission (IEC) Group IIA.

Product Specification Sheet - PDF ( Spanish | Chinese )
Installation & Maintenance Instructions - PDF ( Spanish | Chinese )
Sizes 2" (DN 50) through 10" (DN 250)
FM Approved in 2", 3" & 4"
UL Listed in sizes 6", 8" & 10"
Settings achieved by weight loading
ProFlow® Sizing/Selection Software
Patented, FEP Film "Air-Cushioned Seating"
Low-leak pallet design - certified test reports
Time-saving "swing bolt design" permits easy access