TEXSTEAM™ Plug Valves旋塞阀

TEXSTEAM™ Plug Valves旋塞阀
TEXSTEAM™ Plug Valves旋塞阀由美盛科技中国有限公司供应
TEXSTEAM 旋塞阀在苛刻的使用条件，如 H2S、 CO2 和磨料或严重的服务应用程序中有悠久的可靠性。TEXSTEAM 阀门都被针对高耐腐蚀性、泡沫紧密封、高耐磨、耐冲击性高。

TEXSTEAM™ Plug Valves旋塞阀
TEXSTEAM™ Plug Valves旋塞阀由美盛科技中国有限公司供应
TEXSTEAM 旋塞阀在苛刻的使用条件，如 H2S、 CO2 和磨料或严重的服务应用程序中有悠久的可靠性。TEXSTEAM 阀门都被针对高耐腐蚀性、泡沫紧密封、高耐磨、耐冲击性高。

TEXSTEAM PLUG VALVES

TEXSTEAM D Series Plug Valve

texsteam, Texsteam Valves, D series, plug valves, D Series Plug Valve

If your oilfield has tough service conditions - H₂S, CO₂,entrained sand, high flow conditions - you need the TEXSTEAM™ D Series Plug Valve.

Ten good reasons to use the Texsteam D Series Plug Valve

D Series block valves are top entry, infield/inline repairable - saves you substantial repair time and money.
Choice of molded PC Buna-N or FKM seats.
Bubble tight shut-off - zero leakage.
Soft, resilient DuraSeat^TMwon't pit or scratch like Teflon or Nylon.
Meets NACE MR0175 (2002) standard. Built and tested to ASME b16.34.
Large, rugged stem with secure locking device to prevent tampering.
Quarter turn with internal stops.
Time-tested design has been working hard for years in oilfields worldwide.
Every D Series valve is backed by the respected Cameron name.

The Secret's in the Seats

The secret to our TEXSTEAM D Series block valves is in the seats -soft, PC Buna-N* injection molded seats that won't scratch or leak like Teflon or Nylon - even under tough service conditions.

Valves - TEXSTEAM Super G Lubricated-Non Lubricated Single Body/Dual Plug

TEXSTEAM^® Super G Lubricated Plug Valve Design Standards

Whenever applicable Super G Valves conform to the latest edition of the following standards specification as to pressure ratings, dimensions and construction:

ASME - American National Standards Institute
B1.20.1 - Pipe Threads, General Purpose
B16.5 - Pipe Flanges and Flange Fittings
B16.10 - Face-to-Face and End -to-End Dimension of Valves
B16.25 - Butt Welding Ends
B16.34 - Valves-Flanged, Threaded and Welding End
API - Americn Petroleum Institute
6D - Specification for Pipeline Valves-Monogram Available
6FA - Fire Test for Valves
MSS - Manufacture's Standardization Society of the Valve and Fittings Industry
SP-6 - Standard Finishes for Contact Faces of Pipe Flanges and Connecting End Flanges of Valves and Fittings
SP-25 - Standard Marking System for Valves, Fittings, Flanges and Unions
SP-55 - Quality Standards for Steel Castings for Valves, Flanges, Fittings and other Piping Components (Visual Methods)
Nace - National Association of Corrosion Engineers
MR0175 (2002) - Sulfide Stress Cracking Resistant Metallic Materials for Oil Field Equipment