筛选
-
- 地区
- 全部
-
- 会员级别
- 全部
耦合方式:电容耦合 | Coupling method: capacitor coupling |
耦合电容:9μF(共模试验) 18μF(差模试验) | Coupling capacitor: 9μF(common mode test) 18μF(normal mode test) |
去耦电感:1.5mH | Decoupling inductor: 1.5mH |
项 目 Item | SGN-5010A | SGN-5010B | SGN-20 |
耦合的浪涌波形 Surge waveform coupled | 综合波(1.2/50μs电压波,8/20μs电流波) Combination waveform(1.2/50μs voltage waveform, 8/20μs current waveform) | ||
最大输入浪涌电压 Max. input voltage waveform | 6.6kV | ||
最大输入浪涌电流 Max. input current waveform | 3.3kA | ||
耦合方式选择 Coupling mode choice | 手动操作 Manual operation | ||
被试设备容量 Power capacity of EUT | 单相,3线,220V,10A Single phase, 3 wire, 220V, 10A | 单相,3线,220V,20A Single phase, 3 wire, 220V, 20A | 三相,5线,380V,20A Three phase, 5 wire, 380V, 20A |
未加浪涌线上的残余电压 The residual surge voltage on unsurged line | 试品不接时,残余电压不超过所施最大试验电压的15% Not exceed 15% of the max. applicable test voltage when EUT is disconnected | ||
电源线入口接的残余电压 The residual surge voltage on the power supply input of the decoupling network | 试品不接时,残余电压不超过所施最大试验电压的15%或电源线峰值电压两倍 Not exceed 15% of the max. applicable test voltage when EUT is disconnected or twice for peak &#118alue of the power line voltage whichever is higher | ||
工作电源 Power in | AC 220V 50/60Hz | ||
环境温度 Operating temp. | 15℃-35℃ | ||
重量 Weight | 25kg | 35kg | |
外形尺寸 Dimensions (D×W×H)mm | 460*520*240 | 460*520*310 |