扭力测试仪 CD-100M

性能特点

(1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display.

(2) 单位 N-m <=> kgf-cm <=>lbf-in Etc.

(3) Setup of Various Numerical Values Can be Easy and Can Carry Out Speedily.

(4) 最大值、最小值、平均值计算

(5) 数据存储方便，智能化数据输出

(6) 过载保护，具有指示灯

(7) USB接口输出(B Type).

(8) 800数据存储

(9) 实时输出每秒180次

技术规格： CEDAR 螺丝刀扭力测试仪

Specification	CD-100M	CD-10M
Measuring range (at the time of Track)	0.10～10　N・m	1.0～100　cN・m
	1.0～100 kgf・cm	0.10～10 kgf・cm
	1.0～90 lbf・in	0.10～9 lbf・in
基本精度	±0.5％（F/S）(199 or less digit±1digit)
显示	3.5位数字显示LCD
双方向	CW-CCW (right and left)
测试模式	Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)
上下限设置	High and low value are measurement within the limits, and can be set up.
实时输出	Load torque value is outputted every about1/ 180 second.
最大值小值均值	The maximum, the minimum, average value, and the data number of 30 data are displayed.It saves to ten channels.
自动复位设定	Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
一键复位	A clear button is pushed and it is a zero.　 Data is outputed.
Data output	ASCII format (baud rate 19200)
电源	Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save	10 minutes no use, automatically switch off.
Charging time	About 3 hours
Continunous working time	About 12 hours
Socket fit mouth	□ 20mm/ □9.5mm
Weight	Abbreviation 1 kg
Outside dimension	160（W）×125（D）×55（H）
测试头	Measurement joint　SJ50/SJ10K	Measurement joint　SJ10
Accessories (one piece each)	AC/DC adaptor
	Exclusive receipt case
	An inspection report, a proofreading certificate, traceability system figure

cedar扭力测试仪订货周期：

1～3个工作日

本页面标题：扭力测试仪 CD-100M CD-10M 电批扭力测试仪