上海嘉鹏科技有限公司综合内外秀生化实验设备制造经验独生产的DHL-B电脑恒流泵 ，进行系统详解，可快速查询产品的新报价、图片、技术参数，或者进行产品性能比较，使用非常方便。先感谢您使用本厂的产品，请在使用本产品之前详细阅读本说明书。
1. DHL-B电脑恒流泵概述 ：
DHL-B电脑恒流泵是种新颖的电脑控制流量的蠕动泵，具有能自动选择流量，地显示输液量，当输液量达到预置总量时能自动报警并作相应的后处理等功能。该泵操作简便，性能稳定、可靠，可长期连续工作，并能保存输入的工作参数。适合需要蠕动泵的各行各业。
本蠕动泵可与本厂生产的DBS-100/160电脑全自动部份收集器配合工作。
2. DHL-B电脑恒流泵主要技术指标 ：
2.1 电源电压：AC220V±10%，30Hz
2.2 使用环境：温度0~40°C，湿度< 83%
2.3 流量选择范围：0.01ml/M~13.00ml/M
2.3.1 使用3mm硅胶管时：0.01ml/M~2.00ml/M（电脑自动限定）
2.3.2 使用3mm硅胶管时：0.3ml/M~13.00ml/M（电脑自动限定）
2.4 预置总量选择范围：0~9999ml或0~99.99 l。
2.5 百分比流量修正范围：±30%（电脑自动限定）
2.6 具有数据断电保存功能：可保存10年。
2.7 流量精度：±2%
3. DHL-B电脑恒流泵使用注意事项 ：
3.1 调距板（即泵头前后的滑动板）的调节螺丝是用于调节液体压力的，般只要拧到有液体流动即可，调节时须注意不要拧得太紧，否则滚子会搁死。
3.2仪器在使用期间，应随时注意硅橡胶管是否完好，般在中速情况下运转为佳，当发现硅橡胶管使用老化时，应及时更换。当仪器开始运转时，硅橡胶管可能有向端肿起现象，可用手拉直即可。
3.3要注意保持泵槽内清洁，尤其对滚子轴套（当中只）必须擦干净，以免“Ｔ”字轮搁死。如果长时间不使用，应取下硅橡胶管，延长使用期限。
3.4 DHL-B电脑恒流泵要注意妥善保管，存放在干燥、通风、无腐蚀气体的地方。

 

上海嘉鹏科技有限公司 www.shjpkj.com / www.jp1718.com
电话：       36162366
400免费咨询电话：4000-123-925 
手机： 
企业QQ，2880150292，2880150293，2880150290，2880150297
传真：
地址：上海市真陈路1398弄15号  邮编：200444

DHL-B series of constant-current pump computer
First of all, Thank you for using our products, please, before using this product read the manual.
1. Overview
DHL-B series of constant-current pump computer is a novel computer-controlled peristaltic pump flow has to flow automatically and accurately shows the volume of infusion, when the fluid reached automatically when the preset volume and a corresponding alarm post-processing functions. The pump is simple, stable performance, reliable, long-term continuous work and the work of preservation of input parameters. Peristaltic pump suitable for the needs of all walks of life.
The peristaltic pump can be factory produced DBS-100/160 computer with fully automatic traps most of the work.
2. The main technical indicators
2.1 supply voltage: AC220V ± 10%, 30Hz
2.2 environment: Temperature 0 ~ 40 ° C, humidity <83%
2.3 Flow selection: 0.01ml / M ~ 13.00ml / M
2.3.1 When using 3mm silicone tube: 0.01ml / M ~ 2.00ml / M (automatically qualify)
2.3.2 When using 3mm silicone tube: 0.3ml / M ~ 13.00ml / M (automatically qualify)
2.4 preset selection total: 0 ~ 9999ml or 0 ~ 99.99 l.
2.5 to amend the scope of the percentage of flow: ± 30% (the computer automatically qualify)
2.6 has a power saving data: can be stored for 10 years.
2.7 Flow accuracy: ± 2%

3. Caution
Plate 3.1 pitch (that is, before and after the pump head of the sliding board) is the adjustment screw for regulating the fluid pressure in general as long as the twist of the liquid can flow, regulation should be careful not to screw too tightly, or else will be tied up roller .
3.2 in the use of equipment, you should always pay attention to whether the silicone rubber tube intact, the general circumstances in the medium-speed running is better, when found in the use of an aging silicone rubber should be replaced promptly. When the equipment started to operate, the silicone rubber tube may have to end肿起phenomenon can be straightened by hand.
3.3 bed pump to keep clean, especially on the roller sleeve (of which a) must be clean so as not to "T" word round tied up. If the long period of time not to use, silicone rubber tube should be removed to extend the period of use.
3.4 Instrument to the attention of the proper custody, stored in dry, ventilated place without corrosive gas.