全自动压片机XRF射线萤光 SPEX 3630-115

技术参数
设备尺寸 23 in. (58 cm) x 11 in. (28 cm) x 32 ½ in. (82 cm)
重量 121 lbs. net (55 kg); 190 lbs. gross (87 kg)
功率 1/3 horsepower
电压 115 or 230V/50Hz
压力 10-35吨 ram pressure (20,000 - 70,000 Ibs.)
压盘移动 1.0 inch (2.5 cm)
盘径 3.25 inches diameter (8 cm)
行程可调整5-15cm
上部镙栓可调范围9cm

主要特点
应用领域
X射线萤光、地质、水泥等

典型解决方案

为光谱仪重复压制样品，极大的提高了样品的一致性

操作演示: www.tkichina.com

主要特点
1. 自动液压35吨，适合所有Spex模具。
2. .带有一个互锁装置聚碳酸脂的透明推拉门和一个压力阀。
3. 比多数手动压片机较小和较轻，但有10吨更大容量和精确的压力控制
4. 反应速度快，不到30秒就达到希望压力值。
5. 高度自动化、可编程、实验室压片机，全部循环只需按一次开关。
6. 为光谱仪重复压制样品，极大的提高了样品的一致性。
7. 技术人员可以自由的做其它工作，而无需全程操作。
当完成一个压制循环，压机回到压盘的基础位置，同时发出一个声音信号，准备下一个样品。
Automated X-Press
This unique programmable laboratory press performs the entire pressing cycle with the push of a single button. The 3630 X-Press is a 35-ton programmable hydraulic press intended for the repetitive pressing of sample pellets for spectroscopy. Automation greatly improves sample uniformity and frees the technician for other tasks, as this press will operate unattended. In automatic mode, this press performs a complete pressing cycle. On starting, it goes to a selected pressure, maintains the pressure for a set time, and drops the pressure to zero over a programmed interval. On completion of the cycle, the press returns the platen back to the base position and makes an audible signal indicating it is ready for the next sample. The 3630 accepts all SPEX SamplePrep pellet dies and can also be operated manually as a simple motorized press whose functions are under direct user control. Safety features include a transparent polycarbonate door with system interlock, and a pump cutoff in case of system or operator error.
• Unique programmable laboratory press.
• 35-ton hydraulic press for repetitive pressing of sample pellets.
• Automation improves sample uniformity, consistency and throughput.
• Program allows the technician to enter final pressure desired, time to hold at the final pressure, and interval to return back to zero pressure.
• Typical pressing cycle is less than two minutes.
• Accepts all SPEX SamplePrep die sets.
• A safety interlock and automatic pump shut-off safety valve ensure safe operation.
A European CEE 7/7 two-prong plug is supplied with each 3630-230 system.

仪器介绍
Spex公司制造的方便有效的自动压片设备。

X系列压制设备比多数压片机体积小，重量轻，但是有35吨压力和精确的压力控制。在典型的操作中，安全可靠开关被激活，上升柱塞压片对着可调整的螺栓，不到30秒就达到希望压力。

无须检查当前的减压阀确保所有的球是否同样的压力，所有小球是被压给动力压盘回到X-Press压力线，同时缩短你的样品准备。准备下一次压制。安全保护包括一个带有互锁装置聚碳酸脂的透明推拉门和一个压力阀，作用是必须关上保护门才能施加压力以保护您的安全。