筛选
-
- 地区
- 全部
-
- 会员级别
- 全部
价格：
面议
产品型号：ASTM D518, ASTM D1149, ASTM D1171, ASTM D3395, AST
品牌：2531543
公司名称：东莞华科东尼仪器有限公司
所在地：广东东莞
发布时间：2018-07-17
东莞华科东尼仪器有限公司
产品简介
臭氧老化试验机
该臭氧老化符合ASTM D518, ASTM D1149, ASTM D1171, ASTM D3395, ASTM D4575等标准。
产品详情
※实验室的设计规划；
※仪器及消耗品的配备；
※安装及培训；
※预防性维修（保养）计划服务；
※专业校准计量服务；
※产品检测及认证;
※Design program for laboratory
※Provision of all testing machines and consumables
※Installation and training
※Maintenance plan service
※Professional calibration and measure services
※Product testing and certification service
商铺其他产品
联系商家
立即询价
发布询价单
联系人：胡云香
联系电话：0769-23010657
臭氧老化试验机 Ozone stabilised weatherometer exposure
特性;
1. 该臭氧老化符合ASTM D518, ASTM D1149, ASTM D1171, ASTM D3395, ASTM D4575等标准。;
2. 带有臭氧控制器，可自动进行测试;
3. 带有臭氧监控器;
4. 臭氧通过先进的陶瓷臭氧发生器产生;
5. 静态和动态测试系统;
6. 自动关机定时器;
7. 记录器-带有2支纪录笔可用于在测试期间显示臭氧的浓度/温度;
8. 自动控制臭氧的浓度（0-250pphm,精度+/-2.5%）(也可以定制较高浓度的臭氧超过300pphm，精度+/-3.5%);
9. 臭氧的产生是连续的;
10. 通过微处理器控制温度范围20°C到90°C。;
11. 可提供动态和静态测试两种支架;
12. .动态样品支架可以连续的运动，用于研究橡胶在动态条件下的老化情况;
13. .静态测试支架带有轨道，在测试期间，样品可暴露于测试箱的气体中;
14. 将数字显示器设定在理想的臭氧测试浓度，自动控制系统会自动控制并保持"设定点"的浓度;
Character;
1. The ozone aging D518, ASTM accords with ASTM D1149, ASTM D1171, ASTM D3395, ASTM standard D4575 etc. ;
2. With ozone controller, it can automatic test,
With ozone monitors; 3.
4. Ozone through advanced ceramic ozone generator produces,
5. Static and dynamic testing system,
6.Automatic shutdown timer;
7. Recorder with 2 teams record pen can be used for during the tests shows ozone concentration/temperature,
8. Automatic control ozone concentration (0-250pphm, accuracy + / - 2.5%) (can also customize high levels of ozone over 300pphm, accuracy + / - 3.5%);
9. Ozone is generated from continuous;
10. Through the microprocessor control temperature range ° C 20 ° C to 90. ;
11. Can provide dynamic and static test two bracket,
12.. dynamic sample stents can continuous movement, used to study the dynamic conditions of rubber on aging,
13.. static testing stents carry a track, during the tests, sample can be exposed to test cases of gas;
14. Will digital display set in the ideal ozone test concentration, automatic control system will automatically control and maintain "set point" concentration,
(检测技术整体解决方案服务商）检测设备的开发、生产和销售，产品检测认证、计量校准等整体服务。秉承先进的设
1. 该臭氧老化符合ASTM D518, ASTM D1149, ASTM D1171, ASTM D3395, ASTM D4575等标准。;
2. 带有臭氧控制器，可自动进行测试;
3. 带有臭氧监控器;
4. 臭氧通过先进的陶瓷臭氧发生器产生;
5. 静态和动态测试系统;
6. 自动关机定时器;
7. 记录器-带有2支纪录笔可用于在测试期间显示臭氧的浓度/温度;
8. 自动控制臭氧的浓度（0-250pphm,精度+/-2.5%）(也可以定制较高浓度的臭氧超过300pphm，精度+/-3.5%);
9. 臭氧的产生是连续的;
10. 通过微处理器控制温度范围20°C到90°C。;
11. 可提供动态和静态测试两种支架;
12. .动态样品支架可以连续的运动，用于研究橡胶在动态条件下的老化情况;
13. .静态测试支架带有轨道，在测试期间，样品可暴露于测试箱的气体中;
14. 将数字显示器设定在理想的臭氧测试浓度，自动控制系统会自动控制并保持"设定点"的浓度;
Character;
1. The ozone aging D518, ASTM accords with ASTM D1149, ASTM D1171, ASTM D3395, ASTM standard D4575 etc. ;
2. With ozone controller, it can automatic test,
With ozone monitors; 3.
4. Ozone through advanced ceramic ozone generator produces,
5. Static and dynamic testing system,
6.Automatic shutdown timer;
7. Recorder with 2 teams record pen can be used for during the tests shows ozone concentration/temperature,
8. Automatic control ozone concentration (0-250pphm, accuracy + / - 2.5%) (can also customize high levels of ozone over 300pphm, accuracy + / - 3.5%);
9. Ozone is generated from continuous;
10. Through the microprocessor control temperature range ° C 20 ° C to 90. ;
11. Can provide dynamic and static test two bracket,
12.. dynamic sample stents can continuous movement, used to study the dynamic conditions of rubber on aging,
13.. static testing stents carry a track, during the tests, sample can be exposed to test cases of gas;
14. Will digital display set in the ideal ozone test concentration, automatic control system will automatically control and maintain "set point" concentration,
(检测技术整体解决方案服务商）检测设备的开发、生产和销售，产品检测认证、计量校准等整体服务。秉承先进的设
计技术和理念，卓越的制造技术和严格的质量管理系统，为企业和质量检测机构提供世界一流的产品。所有仪器均符合国
际市场测试标准，提供全面的实验室整体解决方案：
(detection technology integral solution providers) is located in Dongguan -the south of China,
(detection technology integral solution providers) is located in Dongguan -the south of China,
specialized in researching, manufacturing and selling the test equipments. Continue its advanced design
technology and concept, excellent technology of producing and outstanding system of quality management;
providing the enterprises and the quality inspection agencies with high class products. All products meet
the International testing standard. Meanwhile, we provide customer with complete solutions of laboratory.
※实验室的设计规划；
※仪器及消耗品的配备；
※安装及培训；
※预防性维修（保养）计划服务；
※专业校准计量服务；
※产品检测及认证;
※Design program for laboratory
※Provision of all testing machines and consumables
※Installation and training
※Maintenance plan service
※Professional calibration and measure services
※Product testing and certification service
TONY东尼集团-东莞事业部
东莞市东尼仪器有限公司
QQ:615856669
TEL:86-769-89787615
MP:+0
TEL:86-769-23010667
FAX:86-769-23010657
地址:广东省东莞市莞城区东纵大道
- 询价产品：臭氧老化试验机 ASTM D518, ASTM D1149, ASTM D1171, ASTM D3395, AST
- 询价数量： /个
- 联系人：
- 联系电话：