筛选
-
- 地区
- 全部
-
- 会员级别
- 全部
ND - 8805 加硫成型机 试法是将原料放于铸模内,夹于本机电热平板间,加以压力及温度,
使原料成型,以供试验,做为工厂大量生产配料之依据。
This machine is very convenient for preparing test specimens。Put raw materials
into cast die and clamp the die between the electric heating plates of the machine,
then apply heat and compress int in order to mold the raw materials to get the
specimens for testing in laboratory and being the standard in mass production。
容量选择 Capacity |
10,30,50 吨 ton(option) |
温度 Temperature |
常温 Room temp. ~ 300℃ |
计时器 Timer |
电子式 Electronic type 0 ~ 99(min) |
电热板面积 Heat plate area |
22.5 x 22.5cm |
电热板间距 Heat plate space |
0 ~ 100mm |
电源 Power |
AC220V / 50Hz |