HBE-3000A电子布氏硬度计

研发、生产、销售厂家：武汉格莱莫检测设备有限公司
电话：
传真： QQ:34580830
http://www.glmgs.com
http://www.dianzitianping.cn

一、产品简介
One, product introduction
HBE-3000A电子布氏硬度计适用于测定黑色金属、有色金属的布氏硬度。本机采用闭环式传感器加载、电子控制系统，具备10级的试验力。本机具有精度高、高重复性和稳定性，操作简便等特点。适用范围：布氏硬度采用的试验力大，压痕直经也大，适合具有大晶粒金属材料的硬度测试，如: 铸铁，有色金属及合金，各种退火、调质处理后的钢材，特别是对于较软的金属，如纯铝、铅、锡等。
HBE-3000A electronic Brinell hardness tester is applicable to determination of ferrous metal, non-ferrous metal Brinell hardness. This machine adopts closed loop sensor loading, electronic control system, with 10 level of test force. This machine is of high accuracy, high repeatability and stability, simple operation. Scope of application: Brinell hardness test indentation by force, straight warp is also large, for big grain hardness test, such as: cast iron, non-ferrous metals and alloys, various annealing, hardening and tempering steel, especially for soft metal, such as aluminum, lead, tin and other.
二、技术指标
Two, technical indicators
★布氏标尺：HBW2.5/62.5、HBW2.5/187.5、HBW5/125、HBW5/750、 HBW10/100、 HBW10/250、 HBW10/500、HBW10/1000、HBW10/1500、HBW10/3000
Brinell scale of: HBW2.5 / 62.5, HBW2.5 / 187.5, HBW5 / 125, HBW5 / 750, HBW10 / 100, HBW10 / 250, HBW10 / 500, HBW10 / 1000, HBW10 / 1500, HBW10 / 3000
★试验力：62.5kgf(612.9N)、100kgf (980.7N)、125kgf (1226N)、187.5kgf (1839N)、250kgf 250kgf (2452N)、500kgf (4903N)、750kgf (7355N)、1000kgf (8907N)、1500kgf 1500kgf (14710N)、3000kgf (29420N)
Of test force: 62.5kgf ( 612.9N ), 100kgf ( 980.7N ), 125kgf ( 1226N ), 187.5kgf ( 1839N ), 250kgf 250kgf ( 2452N ), 500kgf ( 4903N ), 750kgf ( 7355N ), 1000kgf ( 8907N ), 1500kgf 1500kgf ( 14710N ), 3000kgf ( 29420N )
★最小测量单位：0.005mm
The smallest unit of measurement: 0.005mm
★总放大倍数：20X
Of the total magnification: 20X
★保荷时间：5~60S
Of duration time: 5 ~ 60S
★仪器尺寸(长×宽×高)：550×210×750mm
Of instrument size ( L x W x H) : 550 x 210 x 750mm
★主机重量：；约125kg
Host: weight of about 125kg;
★试件最大高度：230mm
Maximum height of specimen: 230mm
★电源：AC220V±5%，50~60Hz
Of power: AC220V + 5%, 60Hz 50 ~
★执行标准：GB/T231.2国家标准；JJG150检定规程
Of executive standard: GB / T231.2 JJG150 national standards; verification regulation
★标准配件附件：测量显微镜一套、直经2.5、5、10mm硬质合金球压头、标准硬度块（2）、，大平试台、中平试台、“V”型试台、电源线
Of standard accessories: measuring microscope set, straight after 2.5, 5, 10mm carbide ball head, standard hardness block ( 2), a large, flat bench, the bench," V" type test bench, power line