筛选
-
- 地区
- 全部
-
- 会员级别
- 全部
价格：
面议
产品型号：HV-1000
品牌：2734569
公司名称：武汉格莱莫检测设备有限公司
所在地：湖北武汉
发布时间：2013-06-07
武汉格莱莫检测设备有限公司
产品简介
HV-1000显微硬度计是基本型的显微硬度计，该机采用LCD显示屏，通过操作面板可对硬度标尺HV或HK各档试验力保荷时间进行选择，光源亮度可作无级调节。操作时，可将目镜测得的D1,D2值直接输入后，硬度值即在LCD显示屏上直接显示。适用范围：热处理、碳化、淬火硬化层，表面覆层，钢，有色金属和微小及薄形零件等。
产品详情
研发、生产、销售厂家：武汉格莱莫检测设备有限公司
电话：
传真： QQ:34580830
http://www.glmgs.com
http://www.dianzitianping.cn
一、产品简介
One, product introduction
HV-1000显微硬度计是基本型的显微硬度计，该机采用LCD显示屏，通过操作面板可对硬度标尺HV或HK各档试验力保荷时间进行选择，光源亮度可作无级调节。操作时，可将目镜测得的D1,D2值直接输入后，硬度值即在LCD显示屏上直接显示。适用范围：热处理、碳化、淬火硬化层，表面覆层，钢，有色金属和微小及薄形零件等。
HV-1000 hardness is the basic type of the hardness, the machine adopts LCD display screen, through an operation panel on the scale of hardness HV or HK stall test to secure the load time are selected, the brightness of the light source can be steplessly adjusted. During operation, the eyepiece measured D1, D2 directly after input, hardness value is displayed on the LCD screen. Scope of application: heat treatment, carburizing, quenching layer, surface coating, steel, nonferrous metal and micro and thin shaped components.
二、技术指标
Two, technical indicators
★试验力：10gf (0.098N)、25gf (0.245N)、50gf (0.49N)、100gf (0.98N )、200gf (1.96N)、300gf (2.94N)、500gf (4.9N)、1000gf (9.8N)
Of test force: 10GF ( 0.098N ), 25gf ( 0.245N ), 50gf ( 0.49N ), 100gf ( 0.98N ), 200gf ( 1.96N ), 300gf ( 2.94N ), 500gf ( 4.9N ), 1000gf ( 9.8N )
★最小测量单位：0.5μm
The smallest unit of measurement: 0.5 M
★总放大倍数：100X（观察 ）400X（测量）
Of the total magnification: 100X ( observation) 400X ( measurement )
★加荷方式：自动（加荷、保荷、卸荷）
Of loading mode: automatic ( loading, and loading, unloading )
★仪器尺寸（长×宽×高）：405×290×480mm
Of instrument size (L x W x H ): 405 x 290 x 480mm
★仪器重量：25kg
Of the weight of the instrument: 25kg
★试件最大高度：65mm
Maximum height of specimen: 65mm
★电源：AC220V±5%，50~60Hz
Of power: AC220V + 5%, 60Hz 50 ~
★执行标准：GB/T4340.2国家标准；JJG151检定规程
Of executive standard: GB / T4340.2 JJG151 national standards; verification regulation
★X-Y试台：尺寸：100×100 mm；最大移动：25×25mm
X-Y bench: size: 100 x 100 mm; the largest mobile: 25 x 25mm
★标准配件 附件： 物镜40x、10x，微氏压头，测量目镜10x，标准硬度块（2），薄形试台、圆柱体试台、平口试台，水平仪，电源线，辅助工具等
The objective of standard accessories: 40x, 10x, Vickers indenter, measuring eyepiece 10x, standard hardness block ( 2), a thin bench, a cylinder test station, flat oral stage, level meter, power line, auxiliary tools
商铺其他产品
联系商家
立即询价
发布询价单
联系人：薛晴
联系电话：027-86619996
电话：
传真： QQ:34580830
http://www.glmgs.com
http://www.dianzitianping.cn
一、产品简介
One, product introduction
HV-1000显微硬度计是基本型的显微硬度计，该机采用LCD显示屏，通过操作面板可对硬度标尺HV或HK各档试验力保荷时间进行选择，光源亮度可作无级调节。操作时，可将目镜测得的D1,D2值直接输入后，硬度值即在LCD显示屏上直接显示。适用范围：热处理、碳化、淬火硬化层，表面覆层，钢，有色金属和微小及薄形零件等。
HV-1000 hardness is the basic type of the hardness, the machine adopts LCD display screen, through an operation panel on the scale of hardness HV or HK stall test to secure the load time are selected, the brightness of the light source can be steplessly adjusted. During operation, the eyepiece measured D1, D2 directly after input, hardness value is displayed on the LCD screen. Scope of application: heat treatment, carburizing, quenching layer, surface coating, steel, nonferrous metal and micro and thin shaped components.
二、技术指标
Two, technical indicators
★试验力：10gf (0.098N)、25gf (0.245N)、50gf (0.49N)、100gf (0.98N )、200gf (1.96N)、300gf (2.94N)、500gf (4.9N)、1000gf (9.8N)
Of test force: 10GF ( 0.098N ), 25gf ( 0.245N ), 50gf ( 0.49N ), 100gf ( 0.98N ), 200gf ( 1.96N ), 300gf ( 2.94N ), 500gf ( 4.9N ), 1000gf ( 9.8N )
★最小测量单位：0.5μm
The smallest unit of measurement: 0.5 M
★总放大倍数：100X（观察 ）400X（测量）
Of the total magnification: 100X ( observation) 400X ( measurement )
★加荷方式：自动（加荷、保荷、卸荷）
Of loading mode: automatic ( loading, and loading, unloading )
★仪器尺寸（长×宽×高）：405×290×480mm
Of instrument size (L x W x H ): 405 x 290 x 480mm
★仪器重量：25kg
Of the weight of the instrument: 25kg
★试件最大高度：65mm
Maximum height of specimen: 65mm
★电源：AC220V±5%，50~60Hz
Of power: AC220V + 5%, 60Hz 50 ~
★执行标准：GB/T4340.2国家标准；JJG151检定规程
Of executive standard: GB / T4340.2 JJG151 national standards; verification regulation
★X-Y试台：尺寸：100×100 mm；最大移动：25×25mm
X-Y bench: size: 100 x 100 mm; the largest mobile: 25 x 25mm
★标准配件 附件： 物镜40x、10x，微氏压头，测量目镜10x，标准硬度块（2），薄形试台、圆柱体试台、平口试台，水平仪，电源线，辅助工具等
The objective of standard accessories: 40x, 10x, Vickers indenter, measuring eyepiece 10x, standard hardness block ( 2), a thin bench, a cylinder test station, flat oral stage, level meter, power line, auxiliary tools
- 询价产品：HV-1000显微硬度计 HV-1000
- 询价数量： /个
- 联系人：
- 联系电话：