一、产品简介
One, product introduction
SYD-510-1凝点试验器是按照中华人民共和国标准GB/T510《石油产品凝点测定法》的规定设计制造的。本仪器采用新型的压缩机、先进的数字温度控制器、独特的致冷浴,制冷效果好,控温精度高,冷浴温度均匀稳定,适用于油品开采、生产、使用单位,各相关院校、科研部门等作石油产品凝点的测定。
SYD-510-1 freezing point tester in accordance with the people's Republic of China standard GB / T510" pour point of petroleum products - Determination of the design and manufacturing requirements.". The instrument adopts the new compressor, advanced digital temperature controller, unique cooling bath, good refrigeration effect, high precision of temperature control, cold bath temperature uniformity and stability, suitable for oil exploitation, production, use unit, relevant institutions, scientific research departments for pour point of petroleum products - Determination of.
二、技术指标
Two, technical indicators
★工作电源:AC 220V±10%;50Hz。
Of working power: AC 220V 10%; 50Hz.
★工作冷槽:单槽二浴,二浴等温。
Of working cold trough: single slot two baths, two bath isothermal.
★冷槽控温:室温~-30℃。
Cold trough temperature: room temperature of - 30 DEG c..
★控温精度:±0.5℃
In the temperature control precision: 0.5 DEG C.
★制冷系统:新型制冷压缩机。
In refrigeration system : a new type of refrigeration compressor.
★环境温度:≤30℃ 。
Ambient temperature below 30 DEG C:.
★相对湿度:≤85%。
Relative humidity: less than or equal to 85%.
★整机功耗:不大于700W。
Power consumption: not more than 700W.
三、产品特点
Three, product characteristics
★工作台面由不锈钢组成,共有一个冷槽两个冷浴,两个冷浴等温。
Of working table made of stainless steel, have a cold trough two cold bath, two cold bath isothermal.
★采用独特的专门技术,冷槽无须使用冷却液,制冷速度快,效率高。冷槽的最低温度可达到-30℃,控温精度可达到±0.5℃。
In a unique expertise, cold trough without the use of cooling liquid, cooling speed, high efficiency. Cold trough minimum temperature can reach 30 DEG C, temperature control precision can reach 0.5 DEG c..
★仪器为台式结构,设计简洁美观,配套齐全,使用方便,购回仪器即可做凝点试验。
In apparatus for desktop structure, design is concise and beautiful, form a complete set is complete, easy to use, can do pour point test repurchase instrument.
商铺其他产品