WIKA面板安装数显仪标准信号输入精度0.1 DI30 969671mm指示器

加工定制：	是	品牌：	WIKA
型号：	DI30 969671mm	类型：	WIKA面板安装数显仪标准信号输入精度0.1 DI30 969671mm指示器
测量介质：	液体气体	测量范围：	-1999-9999（kPa）
精度等级：	0.1	输出信号：	4-20（mA）
防爆等级：	ATEX	防护等级：	IP65
电源电压：	10-30（V）	接口尺寸：	县挂安装支架螺钉固定（mm）

WIKA面板安装数显仪标准信号输入

精度0.1 DI30 96*96*71mm指示器

Digital Indicator for Panel MountingModel DI30

Applications

Plant construction
Machine tools
Test benches
Level measurement
General industrial applications

WIKA面板安装数显仪标准信号输入精度0.1 DI30 969671mm指示器

Special Features

Input free selectable 4 ... 20 mA, 0 ... 20 mA,
DC 0 ... 5 V, DC 0 ...
10 V
Integrated power supply DC 24 V for the transmitter
Min. / max. value storage
2 fully programmable alarm outputs
Linearisation with up to 10 points possible

WIKA面板安装数显仪标准信号输入精度0.1 DI30 969671mm指示器

Description

The digital indicator DI30 has been specially designed to display values
measured by electronic transmitters, such as pressure transmitters or
temperature transmitters.

Different input configurations for standard signals
0/4 ... 20 mA, DC 0
... 5 V and DC 0 ... 10 V, are available, which can be selected via the terminal
configuration and by the selection of the input signal in the instrument
configuration.

Thereby alternatively transmitters with current or voltage signals can be
connected to the same unit. By means of the transmitter supply current loop
transmitters (2-wire) as well as 3-wire and 4-wire transmitters can be
operated.
The transmitter supply is galvanically isolated from the measuring
input.
There are two alarm outputs available.WIKA面板安装数显仪标准信号输入精度0.1 DI30 96*96*71mm指示器

In addition the indicator offers the possibility of sensor calibration and
linearisation with up to 10 points, thus enabling a further adaptation to many
different sensor signals and specific application requirements.

The standard features are completed by the adjustable sampling rate and
display time as well as the input offset for the correction of zero offsets or
sensor drifts.

Unauthorised changes of the set instrument parameters can be prevented by a
user-definable code on different user levels.

All the configuring and programming can be done using the front control
keys.