-
- 地区
- 全部
-
- 会员级别
- 全部
眼镜架抗拉强度试验机Glasses frame tensile strength test machine參考標准:GB/T14214:2003等等
測試目的:測定鏡架的連接部位具備一定的抗拉功能,防止鏡框因拉壓而損壞,確保鏡架可正常安全使用2年或以上。重點針對焊點和相應要求重點檢測的非焊接的連接處。
測試方法:
1、用夾具按要求夾住鏡架(因具體測試內容不同,夾具位置也不相同,例如:兩鏡腿距離鉸鏈20mm處);
2、設定參數(拉升速度、拉力值大小等)
3、啟動儀器,待儀器自動緩慢施加拉力至98N後停止;
4、觀察鏡架狀況,鏡架各部位應無斷裂、脫落等不良現象。
關鍵參數:
1. 測試眼鏡結構接著點是否凝固與材料本身的抗拉力。
2. 可做 拉、擠壓的測試。
3.有3種測試重量單位:可供選擇:公斤、磅、N(牛頓)。
4.提供不同夾具,可分別測試鏡圈、金屬架、板材架等。
5.尺寸:55×33×75 CM(長×寬×高)
6.重量:80 Kg
7.電源:AC220V 50Hz
8.產地:广东
Reference standard: GB/T14214:2003 etc.
The purpose of testing: Determination of frame joints with certain tensile function, prevent frame because of pressure damage, to ensure that the frame can be normal and safe use of 2 years or more. Focusing on the solder joints and the corresponding requirements focus detection non welded joints.
Test method:
1, jig as required ( specific test clamp frames for different content, fixture position is not the same, such as: the two glasses leg distance hinge 20mm );
2, setting parameters ( lifting speed, tension value etc.)
3 In the starting apparatus, the apparatus automatically slow tensile force is applied to the 98N after the cessation of;
4, observe the status of each frame, frame parts should be no fault, shedding phenomena.
Key parameter:
1 test glasses structure then is solidified and material tensile strength.
2 can be pulled, extrusion test.
3 3 test unit of weight: options: kg, pound, N ( Newton ).
4 different fixture, can test mirror ring, metal frame, plate racks.
5 dimensions: 55 x 33 x 75 CM ( length * width * height )
Weight: 80 Kg 6
7 power: AC220V 50Hz
8: Guangdong origin
- 询价产品:眼镜架抗拉强度试验机 BLD-1003B
- 询价数量: /个
- 联系人:
- 联系电话: