韩国DACELL显示仪表DN-500N

DN-500N

- Platform scale, Truck scale,
　Tension/compression tester, Horse weigher,etc.
- 50 kind of parts number can be memorized
- Watch-dog function installed for diagnostics
- Data back up against power stoppage.
- Front display window covered by lexan film for
　the protecting of dust
- Weighing judgment by over & under setting
　when printer is connected
- Three kinds of hold function (peak-hold and
　averagehold, auto-hold)
- Can drive up to 8pcs of load cell (350.)
- RS-232C and CURRENT LOOP standard installed

SPECIFICATIONS

Specifications	Accuracy
Load cell excitation	10VDC±5%, 320mA
A/D converting speed	200times/sec
A/D converter resolution	: 1/520,000 counts(19bits), ΔΣ
Non-linearity	0.01% of full scale
Zero adjustment range	-0.6mV~42mV
Display Unit	7 segment, 20.0mm(H)×13.0(W)mm
Annunciator	steady, zero, tare, gross, auto, print, hold,Interface
Decimal point position	0, 0.0, 0.00, 0.000
Keyboard	Number key and function key 16 PCS.
Temperature-drift	zero ±20PPM/℃, span ±20PPM/℃
Non-linearity	0.01% of full scale
Rear panel	Loadcell input : 5pin connector External control : 12pin input terminal 　(zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C)
Power	SMPS Free Voltage (85V~265V)

Option
① Analog Out-put (V-out) : 0~10V
② Analog Out-put (I-out) : 4~20mA
③ Serial I / F : RS-422, RS-485
④ BCD In-put
⑤ BCD In-out
※ RS3232C and Current loop : Standard Installed

DIMENSIONS