扭力起子 5DPSK

扭力起子

面向小容量的普通紧固作业、扭力检查、破坏性实验等，在易操作、易读取方面出类拔萃。

DPSK(Ⅱ)《标准型》

· 小容量的扭力螺丝起子，最适合普通紧固作业、扭力检查、破坏性实验；

· 使用方便为最大瞄准点，扭动扭力杆，通过直观的圆形刻度板直接读数；

· 左右两边方向都可以使用；

· 带有左右两用的动针；

· 刻度板较大，读取读数十分方便

DPSK(Ⅱ) 《透明刻度板型》

· 因采用了透明刻度板，所以在操作时能方便、清楚地看到刀头的工作情况；

· 各型号同一保证精度为+-3%以内

For small-capacity general tightening torque checked, destructive experiments, etc., easy to operate, easy to read excel。

DPSK (Ⅱ) <Standard type>

· Small capacity torque screwdrivers, most suitable for general tightening torque checked destructive experiments;

·Easy to use for maximum aiming point, twisting the torsion bar, the circular scale plate through an intuitive direct reading;

·You can use the left and right directions;

·Moving around with a dual needle;

·Large scale plate, very convenient readings

·DPSK (Ⅱ) <transparent scale plate-type>

·Due to the use of the transparent scale plates, so the operation can be easily and clearly see the operation of the tip;

·Various models within the same guarantee accuracy of + -3%

技术参数Parameters