-
- 地区
- 全部
-
- 会员级别
- 全部
Narishige的EG-44微量移液器研磨机可最大限度地减少研磨平面上的不规则运动,从而提高精度。
该研磨机是研磨微量吸头的理想选择,由于采用了专门的电机,可以最大程度减少研磨平面的不规则运动。 此外,该型号在所有转速下都能提供稳定的性能 - 从更低的精度到更高的磨削速度。 为微型针的垂直操作配备了易于操作的粗微动同轴操纵器,这也使得能够进行非常精确的研磨。 将分度计安装在针保持器固定部上,使得容易设定所需的磨削角,并且安装适配器用于垂直磨削。 安装新的注水和排水机构以防止堵塞或刨屑的积聚,使得整个装置更易于使用。
Narishige's EG-44 micropipette grinder minimizes irregular movements on the grinding plane for greater precision.
This grinder is ideal for grinding micropipette tips, thanks to its employment of a special motor which is designed to minimize irregular movements of the grinding plane. In addition, this model provides stable performance at all revolution speeds -- from low for more precision to high for faster grinding. An easily operable coarse and fine movement coaxial manipulator is equipped for vertical operation of the microneedle, which also enables very precise grinding. A protractor is mounted on the needle holder fixing section, making it easy to set the required grinding angle, and an adaptor is attached for vertical grinding. New water filling and drainage mechanisms are installed to prevent clogging or the accumulation of shavings, making the apparatus as a whole much easier to use.
Specification
Accessories included |
Dedicated Pipette Holder, Adaptor for Vertical Grinding, Diamond Wheel Cleaner, Power Supply Cable |
Movement range | Slider movement approx. 47mm |
Glass capillary | O.D.1mm - O.D.1.5mm |
Power source |
AC100V(+-5%), 50/60Hz AC120V(+-5%), 50/60Hz AC220V(+-5%), 50/60Hz AC240V(+-5%), 50/60Hz |
Power consumption | Approx. 10W |
Moter speed | Approx. 50 - 2,000rpm |
Dimensions/Weight | W180 x D165 x H310mm, 2.4kg |
- 询价产品:EG-44-L微量研磨机,Micropipette Grinder,Narishige EG-44微量移液器研磨机 EG-44-L
- 询价数量: /个
- 联系人:
- 联系电话: