插头插座磨损测试仪用于插头插座的插脚耐久性试验，满足IEC60884-1等相关标准

 

Abrasion Test for Plugs Model: 59884

 

The Abrasion Test for Plugs is an endurance test of plug pins sleeves according to IEC standard 60884-1 Clause 24.7 figure 28.The Abrasion Tester is a small box with a motor holding sharp edge

probe with weight scratching the surface

 

Technical Specification

1.  The drive is electrical motor (DC) operating

2.  The equipment is table standing, built on aluminium profiles

3.  A steel wire diameter 1 mm has a U-shape and executes the movements over the sleeve with an angle over the pins of 10 degree

4.  Weight generates a force of 4 N

5.  Number of movements are 20 000 (10 000 in each direction)

6.  30 movements per minute

7.  Length of the movement is app. 9 mm of which 7 mm over the sleeve insulation

8.  Control box with start, stop and a counter with automatic stop at preset number of cycles

9.  Weight: App. 30 kg

10. Dimensions: 1000x300x450 mm (LxWxH)

11. Supply: 230VAC, 50/60Hz, 6A