Part Number: 24-422-227

Description: WorkFit-A, Sit-Stand Workstation with Suspended Keyboard, Platinum

Includes arm, worksurface, VESA-bracket stand, base, keyboard tray support, keyboard tray, desk clamp, grommet mount, assembly fasteners, cable management hardware, adjustment tools

* Maximum capacity = 24 lbs (10.9 kg). This is the sum weight of all hardware added to the workstation, including monitor, keyboard, mouse and contents placed on worksurface. The weight of the monitor should not exceed 20 lbs (9.1 kg) and should not be less than 6 lbs (2.3 kg); a minimum total load of 9 lbs (4.1 kg) must be applied to the unit to ensure proper operation

Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm); compatible with displays conforming to the VESA standard, including Apple’s iMac with Built-in VESA Interface

Keyboard tray tilt range = 20°

When in seated position, keyboard tray can drop down approximately ≤ 4" (10 cm) below level of desktop surface, placing the keyboard at the optimum ergonomic height

Mounting Surface Requirements: When installed using Desk Clamp option, can be configured to work with desk surfaces up to 31.5" (80 cm) deep. When installed using Grommet Mount option, center of through-hole should be no more than 29.5" (75 cm) from front edge of desk surface. These requirements ensure that the suspended keyboard tray can extend past the desktop’s front edge

Desk clamp attaches to edge up to 2.5" (65 mm) thick; grommet mount attaches through hole 0.5" to 2.5" (7–65 mm) wide and up to 2.5" (65 mm) thick

Worksurface Dimensions: 22.6" W x 14.4"D (575 x 366 mm)

Keyboard Tray Dimensions: 24" x 7.5" (609 x 191 mm)

Integrated cable management hides cords

Product Weight: 38.2 lbs (17.4 kg)

Shipping Dimensions: 21.5" x 11" x 37" (55 x 28 x 94 cm)

Shipping Weight: 46 lbs (20.9 kg)

Warranty: Five (5) years