PTL交流电源组件

用于测试开关，插头，插座，电缆等时提供不间断电源交流电压可达275V，

参照标准：

IEC 60320 / 1994-06 &9 and ?20 Fig. 15,

IEC 60884-1 / 1994-06 &20 and &21,

IEC 61058-1 / 1996-10 with Amendment 1 / 1997-10&17,

CEE 7 / May 1963 &20 and &21,

EN 60669-1 / 1995 &18 and&19, VDE 0620 /May 1992 &4.4

Standard outfit:

1 single phase dry-type transformer, primary voltage 230 V, 50 Hz, approx. secondary voltages:winding I:0-100-200 V(alternatively as autotransformer or separate), winding II: 0 - 20 - 40 - 60 - 80 V and winding III: 0 - 2 - 4 - 6 - 8 - 10 - 12 - 14 - 16 -18 V (separate),

1 toggle switch to adjust the secondary voltage in steps of approx. 100 V,

1 toggle switch to adjust the secondary voltage in steps of approx. 20 V,

1 toggle switch to adjust the secondary voltage in steps of approx. 2 V,

1 air contactor with illuminated push- buttons,

1 fuse with socket, type D or NH, 1 thermal over-current release, 1 terminal set for input and output.

Design: primarily determined as slide-in module for power supplies, see PTL prospectus N 03e, angle section construction, sprayed with papyrus-white structure varnish, dimensions depending on the output power.

Voltage, amperage and power factor indicating instruments by agreement

Special versions or optional equipment like DC test outfit: on request

德国进口交流电源组件