KINAX WT710角位变送器

KINAX WT710

KINAX WT710角位变送器利用无接触，电容传感系统测得轴的角位。输出为独立于负载的4 to 20 mA直流信号。其精密的设计尤其适合面板安装。

* 无机械触点电容传感系统/无磨损

* 模拟测量方法，高分辨率

* 测量范围：0.. 5 到 0.. 270°（不带变速箱），通过0..48的变速箱可精确测量0－10°

* 测量输出：0.. 1 到0 / 4.. 20 mA / 2, 3或4线制连接

* 可选本安防爆型，符合EEx ia IIC T6，用在易爆场所

* 通过电位计精调/根据用户需求优化仪表的测量范围

* 输出量特性：线性或V型曲线

* 最小扭矩：< 0.001 Ncm

* 驱动轴可以无限制转动：不带附加的变速箱可以无限制转动。

Measuring transducer with contactless, capacitive sensing system for acquiring the angular position of a shaft. A load-independent DC signal with a range of 4 to 20 mA is read out at the measurement output. It is especially well suited for surface mounting to equipment and apparatus thanks to its compact design.

Patented contactless capacitive system / wear-free

Analog measuring method, practically infinite resolution

Angle of rotation measuring range:
0.. 5 to 0.. 270° without gearbox,
0.. 10° through 0.. 48 revolutions with gearbox

Measurement output: 0.. 1 to 0/4.. 20 mA / 2, 3 or 4-wire connection

Available with "intrinsically safe" explosion protection per EEx ia IIC T6, can be used in explosive atmospheres

Measuring span adjustment with potentiometer / optimized adaptation to desired measuring ranges

Output quantity characteristics: linear or as a characteristic V curve

Minimal torque: < 0.001 Ncm

Drive shaft has no mechanical stops: devices without additional gearbox can be infinitely rotated.

Article No.	Meas. Range, Angle	Variant	Direction of Rotation	Output Signal / Auxiliary Power 12 to 33 V DC
710-112DA0	0.. 30°	Standard with drive shaft: 2 mm dia.	Clockwise	4.. 20 mA 2-wire connection or 0.. 20 mA 3-/4-wire connect. (selectable with potentiometer)
710-113DA0	0.. 60°
710-114DA0	0.. 90°
710-116DA0	0.. 270°

The output is trimmed to 4 to 20 mA for standard devices in combination with 2-wire connection.
Order other variants with complete order code (710-.... .... ....) in accordance with the data sheet.