KINAX WT711角度变送器

KINAX WT711

KINAX WT711角度变送器利用无接触，电容传感系统测得轴的角位。输出为独立于负载的4 to 20 mA直流信号。其精密的设计尤其适合面板安装。

* 无机械触点电容传感系统/无磨损

* 测量范围，转动方向，输出特性，开关点和另外的附加功能均可通过PC机编程/简化设计，缩短供货期，减少库存量

* 模拟测量方法，高分辨率

* 测量范围：0.. 10° 到 0.. 50°或0.. 50° 到 0.. 350°

* 测量输出（输出/供电电路）两线制连接（4-20 mA信号）

* 可仿真测量并输出/便于安装调试阶段，对相关其它设备（系统）进行仿真测试

* 输出量特性：可编程设定为线性，V型曲线或任意的特性曲线

* 串行接口

* 外壳坚固：抗震动和冲击

Measuring transmitter with contactless, capacitive sensing system for acquiring the angular position of a shaft. A load-indepent DC-signal with a range of 4 to 20 mA is read out from the measurement output. It is especially well suited for surface mounting to equipment and apparatus thanks to its compact design.

Patented contactless capacitive system, wear-free

Measuring range, direction of rotation, characteristics, output changeover and other functions can be programmed via PC: facilitates planning and project work, short lead times, minimal inventory

Angle of rotation measuring range: 0°...10° to 0°...50° or 0°...50° to 0°...350°

Measurement output (measuring/supply circuit) utilizes 2-wire connection (4 to 20 mA signal)

Simulation of measured value allows to test subsequent control circuits, control loops or measuring circuits during installation

Display of present measurands and graphical representation on screen for longer time periods

Adjustment of mechanical position and fine adjustment of the analog output, zero point and span may be set independently

Programmable output characteristics: linear, V-characteristic or freely selectable linearization curve

Shaft can be turned through full

Serial interface

Very small torque: < 0.001 Ncm

Drive shaft has no mechanical stops: devices without additional gearbox can be infinitely rotated

Surface-mounted device with protection class: IP43