KINAX WT717角位变送器
筛选
  • 地区
    全部
  • 会员级别
    全部
筛选
  • 截止时间
    全部
仪表展览网>产品库>GMC Kinax转角变送器
价格: 面议
产品型号:KINAX WT717
品牌:0
公司名称:珠海市艾博达自动控制设备有限公司
地:广东珠海
发布时间:2015-03-06
珠海市艾博达自动控制设备有限公司
产品简介
KINAX WT717角位变送器,利用无接触,电容传感系统测得轴的角位。测量输出为与测量值成正比的4-20mA独立于负载的直流信号 * 转角的测量范围:0...10 到 0...50 或 0...50 到 0...350° // * 通过0..1555的变速箱可精确测量0-20° // * 测量输出(输出/供电电路)两线制连接(4-20 mA信号)。
产品详情
 
   KINAX WT717角位变送器利用无接触,电容传感系统测得轴的角位。测量输出为与测量值成正比的4-20mA独立于负载的直流信号。
   其坚固的外壳设计适用于工厂,造船厂,运输业,汽车制造厂和化工厂。
 * 无机械触点电容传感系统/无磨损
 * 测量范围,转动方向,输出特性,开关点和另外的附加功能均可通过PC机编程/简化设计,缩短供货期,减少库存量
 * 转角的测量范围:0...10 到 0...50 或 0...50 到 0...350°
 * 通过0..1555的变速箱可精确测量0-20°
 * 测量输出(输出/供电电路)两线制连接(4-20 mA信号)
 * 可仿真测量并输出/便于安装调试阶段,对相关其它设备(系统)进行仿真测试
 * 实时量的被测值和图示可以在屏幕上保持很长时间
 * 机械位置以及模拟输出,零点和量程的调整可以自由编程组态设定
 *  输出量特性:可编程设定为线性,V型曲线或任意的特性曲线
 * 驱动轴可以无限制转动:即使超过量程的最大范围也不会产生磨损。
 * 串行接口
 * 轴上的容许静态负载:最大1000 N (径向),最大 500 N (轴向)
 * 外壳防护等级(IP67):抗震动和冲击

 

Measuring transmitter with contactless, capacitive sensing system for acquiring the angular position of a shaft. 

A load-indepent DC-signal with a range of 4 to 20 mA is read out from the measurement output. The robust housing has made this unit ideal for machines, ship building, transport, construction of vehicles and in the chemical industry.
*       Patented contactless capacitive system, wear-free
*       Measuring range, direction of rotation, characteristics, output changeover and other functions can be programmed via PC: facilitates planning and project work, short lead times, minimal inventory
*       Angle of rotation measuring range: 0°...10° to 0°...50° or 0°...50° to 0°...350°
With gearbox 0...20° to 0...1555 revolutions
Measurement output (measuring/supply circuit) utilizes 2-wire connection (4 to 20 mA signal)
*       Simulation of measured value allows to test subsequent control circuits, control loops or measuring circuits during installation
*       Display of present measurands and graphical representation on screen for longer time periods
Adjustment of mechanical position and fine adjustment of the analog output, zero point and span may be set independently
*       Programmable output characteristics: linear, V-characteristic or freely selectable linearization curve
*       Shaft can be turned through full, no damage occurs even if the upper limit value of the measuring range is exceeded
*       Serial interface
*       Permissible static load on the shaft: max. 1000 N (radial), max. 500 N (axial)
*       Surface mounting device in rugged housing (IP67): vibration and shock resistant
商铺其他产品
联系商家 立即询价
发布询价单