KINAX SR709角位变送器

KINAX SR709角位变送器，用来测得蝶阀等各种阀门以及驱动装置的冲程；变送器将被测量转换成与被测值成正比的直流电流信号

* 无机械触点电容系统/无磨损

* 模拟测量方法，高分辨率

* 冲程测量范围：0.. 10 到140 mm

* 测量输出：0.. 1 到0 / 4.. 20 mA / 2, 3或4线制连接

* 可选本安防爆型，符合EEx ia IIC T6，用在易爆场所

* 通过杠杆调整测量范围，用电位计精调/根据用户需求优化仪表的测量范围

Measuring transducer for acquiring stroke travel at valves, butterfly valves, slides and other actuators. The transducer converts the measured quantity into a load-independent direct current which is proportional to the measured value.

Patented contactless capacitive system / wear-free

Analog measuring method, practically infinite resolution

Stroke travel measuring range: 0.. 10 to 140 mm

Measurement output: 0.. 1 to 0 / 4.. 20 mA / 2, 3 or 4-wire connection

Available with "intrinsically safe" explosion protection per EEx ia IIC T6, can be used in explosive atmospheres

Measuring range is adjusted by varying the leverage, fine adjustment with potentiometer / optimized adaptation of measuring spans to individual requirements

Article No.	Variant	Direction of Rotation	Output Signal / Auxiliary Power 12 to 33 V DC
709-10DA 01	Standard with NAMUR mounting kit for actuators	Lever in neutral position (down): corresponds to 0/4 mA	4.. 20 mA 2-wire connection or 0.. 20 mA 3-/4-wire connect. (selectable with potentiometer)

The output is trimmed to 4 to 20 mA for standard devices in combination with 2-wire connection.
Order other variants with complete order code (709-.... ..) in accordance with the data sheet.