KINAX SR719位置反馈变送器

KINAX SR719位置反馈变送器，带无接触电容传感系统，用于测量和传递控制阀和其他控制设备的线性位置。

测量输出为与测量值成正比的4-20mA独立于负载的直流信号。其精密的设计尤其适合机器设备的面板安装。

* 无机械触点电容传感系统/无磨损

* 测量范围，转动方向，输出特性，开关点和另外的附加功能均可通过PC机编程/简化设计，缩短供货期，减少库存量

* 冲程测量范围：0.. 10 到0…140 mm

* 测量输出（输出/电路）两线制连接（4.. 20 mA信号）

* 可仿真测量并输出/便于安装调试阶段，对相关其它设备（系统）进行仿真测试

* 实时量的被测值和图示可以在屏幕上保持很长时间

* 机械位置以及模拟输出，零点和量程的调整可以自由编程组态设定

* 输出量特性：可编程设定为线性，V型曲线或任意的特性曲线

* 带串行接口

* 外壳防护等级（IP54）：抗震动和冲击，适用于机械和化工工业

This position feedback transmitter with contactless, capacitive sensing system is used to measure and transmit linear displacement (stroke) on various types of control valves and other control devices.

A load-independent DC-signal with a range of 4 to 20 mA is read out from the measurement output. It is especially well suited for surface mounting to equipment and apparatus thanks to its compact design.

Patented contactless capacitive system, wear-free

Measuring range, direction of rotation, characteristics, output changeover and other functions can be programmed via PC: facilitates planning and project work, short lead times, minimal inventory
Stroke travel measuring range: 0...10 to 0...140 mm

Measurement output (measuring/supply circuit) utilizes 2-wire connection (4 to 20 mA signal)

Simulation of measured value allows to test subsequent control circuits, control loops or measuring circuits during installation

Display of present measurands and graphical representation on screen for longer time periods

Adjustment of mechanical position and fine adjustment of the analog output, zero point and span may be set independently

Programmable output characteristics: linear, V-characteristic or freely selectable linearization curve
Serial interface

Surface mounting device in rugged housing (IP54): vibration and shock resistant, suitable for use in machinery manufacturing and chemical industry