仪表的操作详细方法（仪器仪表记录纸版）

2012/11/23 9:18:29

浏览：496

仪表的操作详细方法（ 仪器仪表记录纸版 ）

Roll charts
Carry out the'Park procedure described in section
2.3 above. Once the chart has been replaced, return
the cassette to the recorder and check the pens'
zeros/spans against the new chart as described in
sections and .



1.Remove cassete by pressing down on, then pulling
on the retaining clip



2.Open cassette top



3.（ 记录纸、记录笔 ）Remove inner tube



4.Insert new chart roll



5.Open cassette top



6.Lift 'ears' to eject take-up
spool with used chart.



7.Pull off either end pinion（ 记录纸、记录笔 ）



8.Slide the chart off the take-up spool, then push
the pinion fully back onto the empty spool



9.Feed chart under paper guide/chart tear-off.



10.Tear the corners off the chart, then
fold about 5mm of the point back



11.Insert the fold into the slot, then roll the
paper onto the take-up spool, and re-insert
the spool into the cassette.



12.Close the cassette top（ 记录纸、记录笔 ）


13.Close the paper guide/chart tear off strip,
ensuring that the chart is 'square' with the
cassette.



14.Tension the chart

更多记录纸、记录笔可查询jilubi、jiluzhi网站

相关资讯推荐





