筛选
-
- 地区
- 全部
-
- 会员级别
- 全部
易高456新款分体式涂层测厚仪都有哪些探头可选择
2014/12/31 9:42:08
浏览：2402
易高456新款分体式涂层测厚仪在旧款基础上进行了一些改进，在外形和功能上有更大的提高。分体式易高456涂层测厚仪探头可互相更换，因此测试不同量程或底材时，只需要更换探头即可，主机仍可通用。
易高456新款分体式涂层测厚仪最大可测试31mm厚度的涂层，各种量程选择列表如下（F代表铁基、N代表非铁基、NFN代表两用型）
| 测量范围 | 可测试涂层 | 分辨率 | 精确度 |
| 0-31mm | F | 10μm: 0-2mm; 100μm: 2-31mm | ±1-3% or ±100µm |
| 0-30mm | N | 10μm: 0-2mm; 100μm: 2-30mm | ±1-3% or ±100μm |
| 0-25mm | F | 10μm: 0-2mm; 100μm: 2-30mm | ±1-3% or ±100μm |
| 0-13mm | F | 1μm: 0-2mm; 10μm: 2-13mm | ±1-3% or ±50μm |
| 0-5mm | F, N | 1μm: 0-1mm; 10μm: 1-5mm | ±1-3% or ±20μm |
| 0-1500μm | F, N, FNF | 0.1μm: 0-100μm; 1μm: 100-1500μm | ±1-3% or ±2.5μm |
| 0-500μm | F, N | 0.1μm: 0-100μm; 1μm: 100-500μm | ±1-3% or ±2.5μm |
| 测量范围 | 0-1500μm | |||||
| 分辨率 | 0.1μm: 0-100μm; 1μm: 100-1500μm | |||||
| 探头设计 | 凸面直径 | 凹面半径 | 最小净空高度 | 最小样本半径 | ||
| 直探头 | 铁基 F | T456CF1S | 4mm (0.16") | 25mm (0.98") | 85mm (3.35") | 4mm (0.16") |
| 非铁基 N | T456CN1S | 10mm (0.39") | 10mm (0.39") | 85mm (3.35") | 4mm (0.16") | |
| 两用型 FNF | T456CFNF1S | F Mode: 4mm (0.16") N Mode: 26mm (1.02") | 12.5mm (0.49") | 88mm (3.46") | F Mode: 4mm (0.16") N Mode: 6mm (0.24") | |
| 直角探头 | 铁基 F | T456CF1R | 4mm (0.16") | 25mm (0.98") | 28mm (1.10") | 4mm (0.16") |
| 非铁基 N | T456CN1R | 10mm (0.39") | 14mm (0.55") | 28mm (1.10") | 4mm (0.16") | |
| 两用型 FNF | T456CFNF1R | F Mode: 4mm (0.16") N Mode: 26mm (1.02") | 12.5mm (0.49") | 38mm (1.50") | F Mode: 4mm (0.16") N Mode: 6mm (0.24") | |
| 微型M5-90度探头 | 铁基 F | T456CFM5R90A | 3mm (0.12") | 6.5mm (0.26") | Headroom: 16mm (0.63") Width: 7mm (0.28") | 4mm (0.16") |
| 阳极氧化型 | 非铁基 N | T456CN1AS | 10mm (1.38") | 14mm (0.55") | 100mm (3.94") | 4mm (0.16") |
| PINIP探头 | 铁基 F | T456CF1P | 4mm (0.16") | 60mm (2.36") | 170mm (6.69") | 4mm (0.16") |
| 非铁基 N | T456CN1P | 10mm (0.39") | 50mm (1.97") | 180mm (7.09") | 4mm (0.16") | |
| 两用型 FNF | T456CFNF1P | F Mode: 4mm (0.16") N Mode: 26mm (1.02") | 65mm (2.56") | 180mm (7.09") | F Mode: 4mm (0.16") N Mode: 6mm (0.24") | |