德国久茂JUMO热电阻 901102

德国久茂JUMO热电阻   导线式热电偶高温型
详细说明：

德国久茂JUMO热电阻   导线式热电偶高温型
特点：
■ For temperatures from -200 to +1600°C
■ With thermowells made of various materials
■ As single or double thermocouple
■ Connection head form B, BUZ, BUZH, BBK
■ Available with transmitter
Push-in thermocouples are primarily used for measuring temperatures in liquids and gases. The application areas are, among others, in the HVAC, kiln and industrial equipment engineering sectors.
德国久茂JUMO热电阻   导线式热电偶高温型

The connection head form B is suitable for ambient temperatures up to +100°C. The support
tube is made of steel. When using a counter flange, see type sheet 90.9725, the installation
point can be sealed up to 1 bar pressure.
Thermowells made of various materials protect the measuring insert against chemical
influences and mechanical damage. The selection of a suitable thermowell material depends on
the application conditions.
The measuring insert is equipped with thermal pairs (thermocouples) according to
DIN EN 60 584 and DIN 43 710 class 2. Versions with two thermocouples are also possible.
Form B DIN 43 729, die-cast aluminum, M 20x1.5; IP54, ambient temperature -40 to +100°C
Form BUZ, die-cast aluminum, M 20x1.5; IP65, ambient temperature -40 to +100°C
Form BUZH, die-cast aluminum, M 20x1.5; IP65, ambient temperature -40 to +100°C
Form BBK, plastic, M 20x1.5; IP54, ambient temperature -30 to +130°C
Note: reduced ambient temperature range when using a head-mounted transmitter, per
data sheet 70.7010
Process connection Thermowell screw-connection BSP 1/2
Stop flange Ø 15mm, DIN 43 734
Thermowell Steel 1.4749 (equivalent to SS446), Ø 15mm, operating temperature up to +1150°C (seamless)
Steel 1.4841 (equivalent to SS314), Ø 15mm, operating temperature up to +1150°C (seamless)